Installation Manual
23
drain port.
the cabinet in the upper drain hole. Install on collector
box and secure with a silver clamp.
13. Use two silver clamps and secure the hoses to drain trap.
The trap outlet faces the front of the furnace. Secure
the trap to the cabinet using two screws removed in step
2 by inserting the two screws through the large set of
holes in the top mounting tabs of the trap into the two
trap.
end.
outlet and secure with a red clamp.
cabinet drain hole.
tubing.
box drain port and secure with a red clamp.
the cabinet in the upper drain hole. Install on
collector box and secure with a silver clamp.
10. Use two silver clamps and secure the hoses to drain
trap. The trap outlet faces the front of the furnace.
Secure the trap to the cabinet using two screws
removed in step 2 by inserting the two screws through
the large set of holes in the top mounting tabs of
the trap.
Insert flange. Cut 2 ½” long.
R 000142
The furnace drain may exit the right or left side of the fur-
hoses remain as shipped if the drain will exit the left side of
of the trap to outside the cabinet.
1 1/4” clamp to enable removing the trap for future
the trap outlet.
2. Install drain per local and National codes.