Technical Information

ManualsBrandsGoodman ManualsCooling & Air Quality2.5 Ton 15 SEER 96% AFUE 80,000 BTU Gas Furnace and Air Conditioner System - Upflow

RT6612030r1

August 2014

This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does

not assume any responsibility for property damage or personal injury due to improper service

procedures performed by an unqualified person.

*MEC96

34.5" 2-STAGE

MULTI-SPEED ECM GAS FURNACE

UP TO 96% AFUE

• Refer to Service Manual RS6612013 for installation, operation, and troubleshooting information.

• All safety information must be followed as provided in the Service Manual.

• Refer to the appropriate Parts Catalog for part number information.

• Models listed on page 3.

T ECH N I CAL M AN UT ECH N I CAL M AN U

T ECH N I CAL M AN U

ALAL

is a registed trademark of Maytag Corporation or its related companies and is used under license to

Summary of content (9 pages)

PAGE 1
TECHNICAL MANU AL MANUAL *MEC96 34.5" 2-STAGE MULTI-SPEED ECM GAS FURNACE UP TO 96% AFUE • Refer to Service Manual RS6612013 for installation, operation, and troubleshooting information. • All safety information must be followed as provided in the Service Manual. • Refer to the appropriate Parts Catalog for part number information. • Models listed on page 3. This manual is to be used by qualified, professionally trained HVAC technicians only.
PAGE 2
PRODUCT IDENTIFICATION The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please use these numbers when requesting service or parts information. * 1 M 2 E 3 C 4 96 5,6 060 7,8,9 3 10 B 11 N 12 A 13 A 14 Brand AA - -Amanaﬁ Brand Amana® Brand GG - -Goodmanﬁ Brand Goodman® Brand Motor NOx AFUE MBTU/h WARNING HIGH VOLTAGE! Disconnect ALL power before servicing or installing this unit. Multiple power sources may be present.
PAGE 3
PRODUCT IDENTIFICATION The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please use these numbers when requesting service or parts information.
PAGE 4
*MEC96 PRODUCT DIMENSIONS AIR DISCHARGE AIR DISCHARGE A 28 DIM B DISCHARGE 6‰ 2 AIR INTAKE 2" PIPE 2 2 LEFT SIDE DRAIN TRAP EXTERIOR HOLES 6‰ C 19‰ 2 CENTER DIMPLE FOR ALTERNATE AIR INTAKE PIPE 3" OD HOLE HIGH VOLTAGE ELECTRICAL OUTLET VENT/FLUE PIPE 2" PVC ALTERNATE VENT/FLUE LOCATION RIGHT SIDE DRAIN TRAP EXTERIOR HOLES HIGH VOLTAGE ELECTRICAL OUTLET STANDARD GAS SUPPLY LOCATION ALTERNATE GAS SUPPLY 34‰ 31 26‰ 24 23 23 21 19 14 19 SIDE CUT-OUT SIDE CUT-OUT 9… 9… 5 5 1‰ LEFT
PAGE 5
FURNACE SPECIFICATIONS Heating Data High Fi re Input¹ High Fi re Output¹ Low-Fi re Steady-Sta te Input¹ Low-Fi re Steady-Sta te Output¹ AFUE² Tempera ture Ri se Ra nge (°F) Vent Di ameter³ No. of Burners Circulator Blower Ava i l abl e AC @ 0.5” ESP Si ze (D x W) Horsepower @ 1075 RPM Speed Filter Size (in²) Permanent Dis posa bl e Electrical Data 4 Mi n. Ci rcui t Ampaci ty Ma x.
PAGE 6
*MEC96 AIRFLOW DIP SWITCH SETTING 0.1 0.2 CFM Rise CFM Rise CFM 870 870 885 874 1146 658 658 821 697 1097 548 548 755 612 1049 *MEC960302BN FACTORY SETTING All DIP Sw itch Positions G All DIP Sw itch Positions W1 All DIP Sw itch Positions W2 Ylo OFF OFF OFF Y Ylo ON OFF OFF Y Ylo ON ON OFF Y Ylo OFF ON OFF Y Ylo OFF OFF ON Y Ylo OFF ON ON Y Ylo ON OFF ON Y Ylo ON ON ON Y 21 30 0.3 28 32 0.4 Rise 34 35 0.
PAGE 7
*MEC96 AIRFLOW DIP SWITCH SETTING *MEC960603BN FACTORY SETTING All DIP Switch Positions G All DIP Switch Positions W1 All DIP Switch Positions W2 Ylo OFF OFF OFF Y Ylo ON OFF OFF Y Ylo ON ON OFF Y Ylo OFF ON OFF Y Ylo OFF OFF ON Y Ylo OFF ON ON Y Ylo ON OFF ON Y Ylo ON ON ON Y 0.3 0.1 0.2 CFM Rise CFM Rise CFM 894 894 1328 782 1236 846 846 1287 629 1189 780 780 1249 547 1149 42 40 44 41 0.5 0.4 Rise 48 43 CFM 720 720 1215 469 1101 Rise 52 44 0.6 0.7 0.
PAGE 8
AIRFLOW *MEC96 DIP SWITCH SETTING 0.1 *MEC961004CN CFM FACTORY SETTING All DIP Sw itch Positions G All DIP Sw itch Positions W1 All DIP Sw itch Positions W2 Ylo OFF OFF OFF Y Ylo ON OFF OFF Y Ylo ON ON OFF Y Ylo OFF ON OFF Y Ylo OFF OFF ON Y Ylo OFF ON ON Y Ylo ON OFF ON Y Ylo ON ON ON Y 1522 1522 1861 1004 1772 Rise 41 48 0.2 0.3 CFM Rise CFM Rise CFM 1464 1464 1803 890 1713 1402 1402 1749 805 1662 1338 1338 1698 710 1609 43 49 0.4 44 51 Rise 47 52 0.5 0.6 0.
PAGE 9
*MEC96 WIRING DIAGRAMS YL HIGH FIRE PRESSURE SWITCH C NO NO L N WH DISCONNECT PU 2 CIRCUIT CONNECTOR RD WH HI 3 C 2 PU TO 115VAC/ 1 /60 HZ POWER SUPPLY WITH OVERCURRENT PROTECTION DEVICE OR BR FLAME SENSOR WARNING: DISCONNECT POWER BEFORE SERVICING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED.