GSZH5 Service Manual

87
SERVICING
EEM Blower Replacement
For AWUF19-25, AWUF31-32, and AWUF37 Air Handlers.
1. Disconnect power at main electrical panel.
2. Remove front access panel.
3. Remove the two screws on each side holding the lower
control box and move out of the way to give access to
the blower assembly
4. Loosen or remove set screw on blower wheel hub and
ensure the wheel slides freely on the shaft of the motor.
5. 
damage.
6. 
place.
7. Lower blower onto coil.
8. Slide blower assembly all the way to the left side of
cabinet.