MICRO1468I.book Page 1 MICRO1468I CD Micro System for iPhone/iPod Instruction Manual IMPORTANT!Please read all instructions carefully before use and keep for future reference.
MICRO1468I.book Page 2 Introduction Thank you for choosing this Goodmans Micro System. Not only does it play CD’s and receive radio stations, but you can also listen to your favourite tracks on your iPhone/iPod whilst charging it. It’s really easy to use; you can save your favourite radio stations to memory and program your CD tracks in an order to suit you. You can also fully operate your iPhone/iPod from the remote control. IMPORTANT! Use of any electrical equipment should be undertaken with care.
MICRO1468I.
MICRO1468I.book Page 4 Your Micro System Front view 12 11 4 1 13 2 3 4 14 5 6 7 8 9 10 1 STANDBY button 8 PLAY / PAUSE button 2 FUNCTION button 9 OPEN / CLOSE button 3 C.
MICRO1468I.
MICRO1468I.book Page 6 Your Micro System Remote Control 1 2 4 3 5 6 7 8 9 10 11 13 14 16 17 12 15 18 19 6 20 1 STOP button 11 ENTER / FOLDER + button 2 STANDBY button 12 MEMORY button 3 OPEN / CLOSE button 13 M-DOWN / REPEAT button 4 FILE +10 / IPOD UP button 14 M-UP / RANDOM button 5 PLAY / PAUSE button 15 PRESET EQ button 6 MENU / INFO button 16 TIMER / C.
MICRO1468I.book Page 7 01 Getting started Using the support stand Connecting to power If the unit is to be operated on a desk or table, extend the support stand (located on the underside of the unit). If the unit is to be wall mounted, return the support stand to the closed position. Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.
MICRO1468I.book Page 8 Tues 02 Using the radio Basic operation 1 Press the STANDBY button on the main unit or remote control to power on the unit. 2 Press the FUNCTION button on the unit or on the remote control to select Tuner mode. 3 Tune to the station you want by pressing either of the SKIP / TUNE buttons. 4 To turn off the unit, press the STANDBY button. 2 Press the MEMORY button on the remote control, “MEMORY” will flash in the display and a preset number “1” will also show on the display.
MICRO1468I.book Page 9 03 Using the iPhone/iPod Dock Inserting and removing your iPhone/iPod Using the iPhone/iPod menu system 1 Press the Power / Standby Button. 1 Select IPod mode using the FUNCTION button. 2 Press the FUNCTION Button to select iPhone/iPod mode. 2 Carefully insert your iPhone/iPod unit into the dock. 3 Press the OPEN / CLOSE Button to open the CD door. 3 4 Carefully push the iPod dock lever to the right then forward.
MICRO1468I.book Page 10 04 Using the CD Handling CDs To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges. DON’T FORGET!Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism. Never place more than one disc into the disc compartment at any time. Playing CD’s Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth before use.
MICRO1468I.book Page 11 04 Using the CD Repeating CD’s DON’T FORGET!You need to use the remote control to use this function. 1 2 3 To repeat the current track, press the REPEAT button once. "REPEAT" will show in the display. To repeat the entire disc, press the REPEAT button twice. "REPEAT ALL" will show in the display. To cancel repeat play, press the STOP button or press the REPEAT button until the repeat indicator disappears.
MICRO1468I.book Page 12 04 Using the CD Random MP3 playback 3 Press the C-ADJ/ MEMORY or MEMORY button. The first track selection is now stored in program memory. 4 Select the next track to be programmed using the SKIP / TUNE buttons (i.e. track 05). 5 Press the C-ADJ/ MEMORY or MEMORY button to store this track. 6 Continue entering tracks in this way until all the desired tracks are stored (up to a limit of 20).
MICRO1468I.book Page 13 04 Using the CD Programmed MP3 playback DON’T FORGET! The MP3 disc must be in stop mode. 1 Press the C-ADJ/MEMORY or MEMORY button. The following information will show in the display. Listening to programmed MP3 tracks 1 Press the PLAY/PAUSE button. 2 Disc play will start at the beginning of the first programmed track. To Clear the Program Memory 2 Press the SKIP/TUNE buttons to select the folder. Press the C-ADJ/MEMORY or MEMORY button to confirm the folder.
MICRO1468I.book Page 14 05 Using the Clock and Timer Adjusting the clock DON’T FORGET!This unit has its own digital clock when in standby mode. To adjust the clock and set the timer, follow the instructions below: 1 Press the C-ADJ/ MEMORY button and select either “24 hour” or “12 hour” mode using the SKIP / TUNE buttons. 2 Press the C-ADJ/ MEMORY button to confirm. 3 The Hour digits will begin to flash. Adjust the hours by pressing the SKIP / TUNE buttons.
MICRO1468I.book Page 15 06 Other Functions Mute 3 Turn your auxiliary source ‘On’ and operate it as usual. The sound from the auxiliary source can then be heard through the speakers. 4 Adjust the volume level to the desired listening level. DON’T FORGET! You need to use the remote control to use this function. 1 Press the MUTE button on the remote control to turn off the sound. The volume indicator will flash. 2 Press the MUTE button again to restore the sound to the previous level.
MICRO1468I.book Page 16 07 Troubleshooting Pr o b l em Po s s i b l e c au s e Wh at t o d o Station not tuned properly Fine tune broadcast station the antenna wire is not extended Extend FM wire antenna Radio Noise or sound distorted on FM Reposition the unit until the best reception is obtained.
MICRO1468I.book Page 17 08 Specifications Model number MICRO1468I Power supply AC: 100 - 240V ~ 50/60Hz 1.1A DC adaptor output: 10V 2.7A Power consumption 27W Radio frequency coverage FM: 87.5 - 108MHz Speaker system 4 Ohm Power output Watts 4W x 2 Dimensions Unit: 260(L) x 110 (W) x 190 (H) Speaker: 120 (L) x 92 (W) x 190 (H) IMPORTANT! Due to continual revision and improvements to our products design, specifications are subject to change without notice.
MICRO1468I.book Page 18 Safety Sound Levels Your hearing is important to you and to us so please take care when operating this equipment. It is strongly recommended that you follow the guidelines in order to prevent possible damage to, or loss of hearing. Over time your hearing will adapt to continuous load sounds and will give the impression that the volume has in fact been reduced. What seems normal to you may in fact be harmful.
MICRO1468I.
MICRO1468I.book Page 20 www.thesupportsite.co.
