USB 3.
USB 3.0 to SATA Adapter User’s Manual Safety Instructions Always read the safety instructions carefully: Keep this User’s Manual for future reference Keep this equipment away from humidity If any of the following situation arises, get the equipment checked by a service technician: The equipment has been exposed to moisture. The equipment has been dropped and damaged. The equipment has obvious sign of breakage.
USB 3.0 to SATA Adapter User’s Manual Table of Contents Introduction ...........................................................................................................1 Features .................................................................................................................1 Package Contents .................................................................................................1 System Requirements..........................................................................
USB 3.0 to SATA Adapter User’s Manual Introduction The USB 3.0 to SATA Adapter is an ultra and durable USB 3.0 device for you to connect hard drives of USB 3.0. It is a practical solution to connect with 2.5” or 3.5” Hard Drive. The adapter is fashion designed and featuring unique appearance. Features Compliant with Super-Speed USB 3.0 Specification Transfer rate of Super-Speed USB 3.0 interface can be up to 5 Gbps (Max) Compliant with the SATA/SATA II Support 2.5” and 3.
USB 3.0 to SATA Adapter User’s Manual Connecting 2.5” SATA HDD 1. Connect your 2.5” SATA HDD to the SATA connector on the adapter. 2. Connect the attached USB cable to the USB port on your computer. Connecting 3.5” SATA HDD 1. Connect your 3.5” SATA HDD to the SATA connector on the adapter. 2. Connect the adapter with the provided power adapter and then connect the power adapter to a working electrical outlet. 3. Connect the attached USB cable to the USB port on your computer.
USB 3.0 to SATA Adapter User’s Manual Verifying Hard Drive Installation Upon the USB connection, the system should automatically detect your hard drive. To verify if your new hard disk is detected: Under Windows: To verify your installation, select Control Panel > System > (Hardware) > Device Manager. The device USB Mass Storage Device should be displayed under the Universal Serial Bus Controllers group, and your hard disk should be displayed under the Disk drives group.
USB 3.0 to SATA Adapter User’s Manual Using the Attached HDD Now you are ready to use the attached hard drive as external USB 3.0 storage device. (A brand new hard drive must be partitioned and formatted first. You can use Windows Disk Management utility in Windows XP or other disk management software to perform disk-related tasks. Please refer to your software documentation for instructions. Under Windows, the external hard drive(s) should be displayed in My Computer.
USB 3.0 to SATA Adapter User’s Manual Specifications Items Data Rate Descriptions Up to 5Gbps Compliance USB 1.1, USB 2.0 & USB 3.0 Operation Systems Windows XP, Windows Vista , Windows 7 Max Distance 3 meters Operating Temperature 10-40°C Storage Temperature -10~80°C EMC FCC, CE * Specification is subject to change without further notice.
USB 3.0 to SATA Adapter User’s Manual Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation.
