User`s manual

USB 3.0 to SATA Adapter User’s Manual
Using the Attached HDD Using the Attached HDD
Now you are ready to use the attached hard drive as external USB 3.0 storage
device. (A brand new hard drive must be partitioned and formatted first. You can
use Windows Disk Management utility in Windows

XP or other disk management
software to perform disk-related tasks. Please refer to your software documentation
for instructions.
Now you are ready to use the attached hard drive as external USB 3.0 storage
device. (A brand new hard drive must be partitioned and formatted first. You can
use Windows Disk Management utility in Windows

XP or other disk management
software to perform disk-related tasks. Please refer to your software documentation
for instructions.
Under Windows, the external hard drive(s) should be displayed in My Computer.
An USB device monitor icon will appear on the notification area of the taskbar.
Under Windows, the external hard drive(s) should be displayed in My Computer.
An USB device monitor icon will appear on the notification area of the taskbar.
* Drive name and letter vary accoring to your configuration.
Safely Unplug the SATA HDD
The enclosure supports USB hot-pluggable feature. Before unplugging the
enclosure, please use the unplug/eject hardware icon in the system tray to safely
remove the device.
Under Windows
1. In the notification area, right-click the unplug/eject icon and select Unplug or
eject hardware or Safely Remove Hardware.
2. Select the device you want to unplug, then click Stop and OK.
3. When Windows notifies you that it is safe to do so, click OK and unplug the
enclosure from your computer.
4