User Manual

9
02 Installation Instructions
User Manual V1.3
2.2 Packing List
2.3 Mounting
Inverter
Mounting Plate
Expansion
Bolts
Mounting
Plate
CT
Mounting
Frame
Screw
Driver
Allen Wrench
Documentation
Screws
2 PIN
Terminal
6 PIN Terminal
COM
Module
Cap Remove
Tool
PIN Terminal
Ferrules
2.3.1 Select Mounting Location
For inverter's protection and convenient maintenance, mounting location for inverter should be
selected carefully based on the following rules:
Rule 1. Any part of this system shouldn't block the switch and breaker from disconnecting the
inverter from DC and AC power.
Rule 2. Inverter should be installed on a solid surface, where it is suitable for inverter's dimensions
and weight.
Rule 3. Inverter should be installed vertically with a max rearward tilt of 15°.
15°
Rule 4. Ambient temperature should be lower than 45°C (113°F).
(High ambient temperature will cause power derating of inverter.)
Rule 5. It is recommanded that the installation of the inverter should be prevented from direct
sunlight, snow, rain and other negative inuences which may cause function impact or life aging.