User Manual

8. Safety Instructions
The system has been designed and tested under international safety requirements. However, to
prevent personal injury and property damage and ensure long-term operation of the system, do
read this section carefully and observe all safety information at all times.
Battery Module Leakage
If the battery modules leak electrolyte, please avoid contact the leaking liquid or gas. If one is
exposed to the leaked substance, do these actions:
Inhalation: Evacuate the contaminated area, and seek for medical help immediately.
Eye contact: Rinse your eyes with clean water for at least 15 minutes and seek for medical help
immediately.
Skin contact: Wash the affected area thoroughly with soap and clean water, and seek for medical
help immediately.
Ingestion: Induce vomiting, and seek for medical help immediately.
Firefighting Measures
• In case of a fire, please make sure that a carbon dioxide extinguisher or Novac1230 or FM-200 is
nearby. Water cannot be used to extinguish the fire. (ABC is not effective for this battery firefight-
ing)
• Full protective clothing and self-contained breathing apparatus are required for the firefighters to
extinguish the fire.
Warning: Under >150 environment, there is possibility that battery could explode
Handling and Storage Guide
• The battery modules and its components shall be protected from damage when it is in transporting
and handling
• Please take the weight of the battery module system into account during transportation and battery
module shall be lifted carefully
• Do not impact, pull, drag or step on the battery modules, either insert unrelated objects into any
part of the battery modules
• The battery module shall be kept away from a fire, water, strong oxidizers or solvents
• The battery modules cannot be stored in high temperature (> 60) or stored directly under the
sun, or in any high humidity environment.
• Do not use the battery modules if it is defective, or appears cracked, broken.
• Do not attempt to open, disassemble, repair, tamper with, or modify the battery modules without
official permission from GoodWe.
Warning: battery module damage may lead to electrolyte leakage, please contact technical
support immediately.
Technical Data
5*SECU A5.4-204*SECU A5.4-20 6*SECU A5.4-20
Nominal Dis-/Charge
Current (A)*2
Operating Voltage
Range (V)
Nominal Voltage (V)
Nominal Power (kW)*2
Short-Circuit Current
Relative Humidity
Communication
Weight (kg)
Ingress Protection Rating
Storage Temperature ()
Mounting Method
Round-trip Efficiency
Cycle Life*3
Safety
EMC
Transportation
Standard
and
Certification
Dimensions (W×H×D mm)
Max. Operating Altitude
(m)
Operating Temperature
Range ()
Cell Configuration
Cell Type
Number of Module
21.6
4
16S4P 16S5P 16S6P
5 6
27.0
SECU A5.4-20
LFP LiFePO4
51.2
47.5~57.6
50
100
2.56
0~95%
2000
196 245 294
CAN RS485
403x227x455 (SECU A5.4-20)
IP 20
95.0%
≥ 4000 @0.5C/0.5C
IEC62619 IEC63056CEC
CE RCM
UN38.3
-20 ~ +40 (≤One Month) / 0 ~ +35 (≤One Year)
Grounded/ Cabinet
5.12
2.323kA@1.0ms
Charge: 0 ~ +50 / Discharge: -10 ~ +50
32.4
Battery Module
Usable Energy (kWh)*1
*1: Test conditions 100% DOD 0.2C charge & discharge at +25±2 °C for battery system
at beginning life. System Usable Energy may vary with different Inverter.
*2 Nominal Dis-/Charge Current and power derating will occur related to Temperature and
SOC.
*3 Based on Cell under 0.5C/0.5C @ 25±2 test condition and 80% EOL.
13
14