Warranty

Proper&Hose&Set&Up&

•"" To"ensure"maximum"flexibility,"set"up"should"be""

" performed"in"temperatures"above"70"degrees."

•"" Remove"all"packaging"and"ties."

•"" Check"that"the"washer"is"properly"seated"in"the""

" coupling"that"attaches"to"the"home/spigot."

•"" Unwind"the"hose"loosely"in"a"circular"motion"before""

" attaching"to"the"spigot"or"faucet."

•"" Run"water"through"the"hose."

•"" Leave"the"hose"laid"out"straight"and"allow"it"to"heat""

" up"during"the"day."

•"" Wind"hose"accordingly."

Care&for&your&hose&

•" Disconnect"and"reconnect"the"hose"from"any"standard"metal"faucet/hose"bib"and/or"

metal"hose"attachment"a"minimum"of"2"times"per"year"to"maintain"a"proper"seal"of"

the"washer."Loosen"any"possible"corrosion"evident"caused"by"weather"or"

environmental"elements"which"can"cause"the"hose"to"fuse"to"the"faucet"or"

attachment."

• Always"inspect"the"washer"for"proper"placement"and"clear"any"build-up"on"the"

faucet,"coupling"or"washer."This"will"help"prevent"potential"leaks."

Storage&Instructions&

•"" Drain"your"hose"when"you"are"not"using"it.""

" Water"left"in"a"hose"for"extended"periods"of"time""

" may"result"in"the"formation"of"bacteria.""

•"" Store"this"hose"indoors"when"not"in"use."

WARNINGS&&

•"" Do"not"leave"the"hose"under"pressure"when"it"is"not""

" in"use."Heat"or"pressure"may"damage"your"hose,"and""

" could"cause"it"to"leak"or"burst.""

•"" Not"intended"for"indoor"use."

Warranty&

Swan"Products,"LLC®"warrants"this"hose"against"defects""

in"workmanship"or"materials"under"normal"use"for"the""

“Warranty"Period”.""If"a"defect"arises"and"a"valid"claim"is""

received"within"the"Warranty"Period,"Swan"Products,"LLC®""

will"exchange"the"defective"product"for"a"new"one"of""

equal"or"better"quality."

IMPLIED"WARRANTIES"INCLUDING"THAT"OF""

PAGE 1
Proper Hose Set Up • To ensure maximum flexibility, set up should be performed in temperatures above 70 degrees. • Remove all packaging and ties. • Check that the washer is properly seated in the coupling that attaches to the home/spigot. • Unwind the hose loosely in a circular motion before attaching to the spigot or faucet. • Run water through the hose. • Leave the hose laid out straight and allow it to heat up during the day. • Wind hose accordingly.
PAGE 2
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. SWAN PRODUCTS, LLC® DISCLAIMS ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some States/Provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you.