SDS

07/20/2017Revision:
Page: 3
Goof Off Heavy Duty Remover 4 oz.
SAFETY DATA SHEET
05/04/2015Supersedes Revision:
4. FIRST AID MEASURES
Skin:
Remove contaminated clothing. Immediately wash skin thoroughly with large amounts of
water and mild soap, if available. Seek medical attention if irritation develops or
persists.
Eyes:
Immediately begin to flush eyes with water, remove any contact lens. Continue to flush
the eyes for at least 15 minutes. Seek medical attention.
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get immediate medical attention.
Ingestion:
If swallowed, do NOT induce vomiting. Seek immediate medical attention. Call a
physician or poison control center immediately. Never give anything by mouth to an
unconscious person.
Emergency and First Aid
Procedures:
Treatment of overexposure should be directed at the control of symptoms and the clinical
condition of the patient.
Note to Physician:
See Potential Health Effects.
Signs and Symptoms Of
Exposure:
5. FIRE FIGHTING MEASURES
Flash Pt:
No data.
Self-contained respiratory protection should be provided for fire fighters fighting fires in
buildings or confined areas. Storage containers exposed to fire should be kept cool with
water spray to prevent pressure build-up. Stay away from heads of containers that have
been exposed to intense heat or flame.
Fire Fighting Instructions:
Flashpoint: No flash to boiling. This material does not exhibit a flashpoint per the
Setaflash Closed Cup test method.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Non-combustible liquid - use extinguishing media for underlying cause of fire.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
6. ACCIDENTAL RELEASE MEASURES
Prevent entry into waterways, sewers, or confined areas. Absorb or cover with dry earth,
sand, or other non-combustible material and transfer to compatible containers for proper
disposal. For large spills, dike ahead of the spill.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
7. HANDLING AND STORAGE
Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. A source of
clean water should be kept in the immediate work area for flushing of the eyes and skin.
Follow all MSDS/label precautions even after container is emptied because they may
retain product residues.
Precautions To Be Taken in
Handling:
Keep containers closed when not in use. Store in a cool, dry place, out of direct sunlight.
Protect from freezing.
Precautions To Be Taken in
Storing:
Licensed to W.M. Barr and Company
GHS format