Guide

2019 | Condential and Proprietary | Do not distribute
Step 4: Turn o power
● Before turning o the power, test the existing doorbell to conrm the
wired system is intact.
● Locate the home’s breaker or fuse box and turn the power o to the
doorbell and chime. Turn o the main power switch if need be.
● Ring the doorbell to conrm it is turned o.
Geing staed:
Step 5: Remove the chime cover if applicable
● Find the doorbell’s chime and remove the cover. You may need the
ladder to reach.
● Covers vary, some pull or slide o while others use screws.
Tip: If there is no existing chime recommend a Google Home Mini
speaker to announce door guests.
Step 6: Take a picture of the chime’s wires on your phone
This will help with future troubleshooting.
Step 7: Tell the app about your chime wires
Using the app, select the number of wires in your chime and tap on the
wire labels. These labels are usually on or next to the wire connectors or
even on the inside of the chime cover.
Step 8: Connect the chime wires
The app will walk you through the steps with custom instructions
depending on what wires you entered into the app. Follow the specic
wiring the app instructs.
Step 9: Mount the chime connecter
Once the wiring is done, nd a place to put the chime connector. Make
sure the connector and wires don’t touch the chime or any moving
pas, or it may not sound right or work at all. If space is very tight, it
may be easier to aach the connector to the outside of your chime
cover.