System Description

TEL : [phone]
Page
128 of 173
FAX : [phone]
Issued Date
:
Feb. 14, 2020
Form version: 181113
FCC SAR TEST REPORT
Report No. : FA9O2119
15. Bluetooth Conducted Power
Mode
Channel
Frequency
(MHz)
Average power (dBm)
1Mbps
2Mbps
3Mbps
BR / EDR
CH 00
2402
17.85
12.99
12.96
CH 39
2441
17.93
12.94
12.99
CH 78
2480
17.13
12.07
12.03
Tune-up Limit
18
13
13
Mode
Channel
Frequency
(MHz)
Average power (dBm)
1Mbps
2Mbps
LE
CH 00
2402
10.53
10.54
CH 19
2440
10.23
10.24
CH 39
2480
10.19
10.20
Tune-up Limit
10
10
General Note:
1. For 2.4GHz Bluetooth SAR testing was selected 1Mbps due to its highest average power and the duty cycle is
77.22% considered in SAR testing.
16. RF Exposure position consideration
Positions for SAR tests; Hotspot mode
Antennas
Front
Back
Top Side
Bottom Side
Right Side
Left Side
WWAN Ant 0
Yes
Yes
No
Yes
Yes
Yes
WWAN Ant 1
Yes
Yes
Yes
No
No
Yes
WWAN Ant 2
Yes
Yes
No
Yes
Yes
No
WWAN Ant 3
Yes
Yes
Yes
No
No
Yes
WLAN/BT Ant 0
Yes
Yes
Yes
No
Yes
No
WLAN Ant 1
Yes
Yes
Yes
No
Yes
No
General Note:
1. Referring to KDB 941225 D06 v02r01, when the overall device length and width are ≥ 9cm*5cm, the test distance is
10 mm. SAR must be measured for all sides and surfaces with a transmitting antenna located within 25mm from that
surface or edge
2. The detail antenna location refers to operational description.