SDS

Rechargeable Li-Ion Polymer Battery
Security level
Internal public
H043(1S1P) RECYCLED COBALT Battery Specification
Ver.
V1.4
飞毛腿公司机密，未经许可不得扩散。 第 7页, 共 25页
High Temperature
discharge
/高温放电
After standard charged, battery should be stored in a
temperature-controlled environment at 55±2℃ for
2 hours. after storage, battery should be discharged
with 0.2C to 3.0V cut-off.
/电池按规定充电结束后，将电池放入 55℃±2℃的
高温箱中恒温 2h，然后以 0.2C 电流放电至 3.0V.
Discharge time
≥300 mins
/ 放电时间≥300 分钟。
Low Temperature
discharge
/低温放电
After standard charged, battery should be stored in a
temperature-controlled environment at -10±2℃ for
4 hours. after storage, battery should be discharged
with 0.2 C to 3.0V cut-off.
/电池按标准充电结束后，将电池放入-10℃±2℃的
低温箱中恒温 4h 后，以 0.2 C 电流放电至终止电
压
Discharge time
≥180 mins
/放电时间≥180 分钟。
Storage Characteristics
（Retain capacity)/自放电
容量
Stored at 100% SOC
Retained capacity = after storage
discharge 0.2C
min
3.0 V at 25±3℃ divided by
measured capacity before storage
/100%容量的电池包存储后，在 25±3℃下用
0.2C
min
放电至 3.0V 获得的容量除以存储前的容
量。
>83% C
measured
for 3 months at
25℃
>83% Cmeasured for 1 month
at 45℃
>83% C
measured
for 1 week at
60℃
Storage Characteristics
(Recoverable capacity)/存
储恢复容量
Recoverable capacity = Full charge after
storage discharge:
charge CC 0.5Cmin to 4.20V CV 0.05Cmin
Then discharge: 0.2C
min
3.0 V at 25±3℃ divided
by measured capacity before storage
/恢复容量=存储后充满电后放电容量
充电 CC 0.5C
min
后 4.20V CV 充至 0.05C
min
截止，
然后 25±3℃下 0.2C
min
放电至 3.0V 获得的容量除
以存储前的容量
>95% C
measured
for 3 months at
25℃
>95% C
measured
for 1 month at
45℃
>85% C
measured
for 1 week at
60℃