TV Box Important Product Information Guide © 2014 DRAFT v0.
This guide contains safety, handling, disposal, recycling and regulatory information. To avoid injury to people or equipment, carefully read all safety information and operation instructions contained in this guide before using your device. Important Safety and Handling Information Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the device or other property. LOCATION ● Place the TV Box indoors to avoid exposure to lightning, rain, or sun.
● The TV Box has no on/off switch. To disconnect the device from power, you must disconnect the power cord. Make sure the power cord is always easily accessible. ● When connecting or disconnecting the TV Box , always hold the plug by its sides. Keep fingers away from the metal part of the plug. OVERLOADING ● Make sure that the wall outlet, extension cord, and adapter have a sufficient power rating for the TV Box . If not, this can cause an electric fire shock.
REPLACEMENT OF PARTS ● When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitution can result in damage to the TV Box . Repairing or Modifying the Device Do not attempt to open the TV Box or disassemble it. Opening the device can cause electric shock and voids the limited warranty. No user-serviceable parts are inside.
Additional Information For more information from the FCC about exposure to RF energy, go to www.fcc.gov/oet/rfsafety. The FCC and the U.S. Food and Drug Administration (FDA) also maintain a consumer website at www.fda.gov/RadiationEmittingProducts/RadiationEmittingProductsandProcedures / HomeBusinessandEntertainment/CellPhones/default.htm to address inquiries about the safety of mobile phones. Please check the website periodically for updates.
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ○ Reorient or relocate the receiving antenna. ○ Increase the separation between the equipment and receiver. ○ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ○ Consult the dealer or an experienced radio/TV technician for help.
ROHS Model Name GFHD200 Power Supply Input Voltage 100120V ~ Type 50/60Hz, 0.6A Power Consumption 12V 1.5A © 2014 DRAFT v0.
