Safety Guide

ManualsBrandsGoogle ManualsElectronicsMedia Device

Safety, Warranty & Regulatory Manual for H2B



California Battery Charger Efficiency



Where to find product information

This detailed guide includes the basic safety guidelines in the printed Safety & Warranty booklet

that comes with your H2B. It also includes additional safety, regulatory, and warranty

information about H2B.



Safety Warnings

WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE

RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO

YOUR H2B, AND OTHER POTENTIAL HAZARDS



Handling

To avoid damaging your device, accessories or any connected devices, and to reduce the risk of

personal injury, discomfort, property damage or other potential hazards, follow these

precautions below.



Handle your media device with care. Do not drop, throw or slam it. You may damage the device

or the battery if you disassemble, drop, bend, burn, crush or puncture your device. Using a

damaged device may cause battery overheating or injury. Don’t expose your device to liquids,

which can cause a short circuit and overheating. If your media device gets wet, do not attempt

to dry it using an external heat source.



The media device is designed to work best in ambient temperatures between 32° to 95° F (0°

and 35° C), and should be stored between ambient temperatures of -4° and 140° F (-20° and 60°

C). Do not leave your media device in places where the temperature may exceed 140° F (60° C),

such as in a car or near a heating vent, as this may damage the product, overheat the battery, or

pose a potential risk of fire. Keep your device away from heat sources and out of direct

Summary of content (6 pages)

PAGE 1
Safety, Warranty & Regulatory Manual for H2B California Battery Charger Efficiency Where to find product information This detailed guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes with your H2B. It also includes additional safety, regulatory, and warranty information about H2B.
PAGE 2
sunlight. If your device becomes too hot, it may not operate. If this happens, disconnect it from its power source if it is plugged in, move it to a cooler place and don’t use it until has cooled. Contact customer service and do not use the device if it isn’t working properly or has been damaged. Repair & Service Don’t attempt to repair the device yourself. Disassembling the device may result in injury. The device should only be repaired by Google or a Google authorized service provider.
PAGE 3
cause discomfort or burns. Do not sleep on your device or its power adapter, or cover them with a blanket or pillow. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin. Your device may generate additional heat when charging or using certain features, for example when powering external devices such as wired headsets. Use extra care when operating the device in these modes.
PAGE 4
Dispose of your device, battery, and accessories according to local regulations. Do not dispose of them in normal household waste. Improper disposal may lead to fire, explosion, and/or other hazards. For more information on recycling your media device, visit g.co/ HWRecyclingProgram Water Resistance The media device, power adapter and other accessories are not water resistant. Do not allow your media device to come into contact with liquids.
PAGE 5
where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might be present. Service & Support For online help and support, visit s upport.google.com. Regulatory Information Regulatory certification and compliance marks specific to your device can be found on the bottom of your device.
PAGE 6
● ● Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Exposure This device meets the FCC’s requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radiofrequency (RF) energy.