User Manual

ManualsBrandsGoogle ManualsComputers & AccessoriesGoogle WiFi system, 3-Pack - Router replacement for whole home coverage (NLS-1304-25)

Google Wifi User Manual

FCC Statement

Canada, Industry Canada (IC) Notices

Google Wifi setup

Welcome to Google Wifi

What’s in the Box

What you need

Step 1: Find a spot for your Wifi point

Step 2: Plug in your Wifi point

Step 3: Get the App

Step 4: Set up Wi-Fi

Warranty

FCC Statement

REGULATORY INFORMATION

NOTE ON INTERFERENCE IN A RESIDENTIAL INSTALLATION

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. Google Wifi generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation.

If Google Wifi does cause harmful interference to radio or television reception, which can be determined by

plugging in, then unplugging, Google Wifi, the user is encouraged to try to correct the interference by

reorienting or relocating the receiving antenna and/or consulting the dealer or an experienced radio/TV

technician for help.

Summary of content (7 pages)

PAGE 1
Google Wifi User Manual Copyright & Trademarks FCC Statement Canada, Industry Canada (IC) Notices Google Wifi setup Welcome to Google Wifi What’s in the Box What you need Step 1: Find a spot for your Wifi point Step 2: Plug in your Wifi point Step 3: Get the App Step 4: Set up Wi-Fi Warranty Copyright & Trademarks FCC Statement REGULATORY INFORMATION NOTE ON INTERFERENCE IN A RESIDENTIAL INSTALLATION This device has been tested and found to comply with the limits for a Class B digital device, pursuant to p
PAGE 2
Google Wifi complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate Google Wifi or warranty.
PAGE 3
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Radio Frequency (RF) Exposure Information The radiated output power of this device is below the Industry Canada (IC) radio frequency exposure limits. This device has been evaluated for and shown compliant with the IC Radio Frequency (RF) Exposure limits.
PAGE 4
(i) L'appareil qui fonctionne dans la bande 5150-5250 MHz doit uniquement être utilisé à l'intérieur afin de réduire les risques d'interférences nuisibles sur les systèmes mobiles par satellite qui utilisent les mêmes canaux; Renseignements sur l'exposition aux radiofréquences (RF) La puissance de rayonnement de cet appareil est inférieure aux limites d'exposition aux radiofréquences d'Industrie Canada (IC). Cet appareil a été évalué et jugé conforme aux limites d'exposition aux radiofréquences (RF) d'IC.
PAGE 5
What’s in the Box ● ● ● ● 1 or 3 Wifi points 1 Ethernet cable 1 Power adapter Quick start guide What you need The Google Wifi app on an Android or iOS mobile device: ● Android 4.0 and up ● iOS 7 and up A broadband internet connection via Ethernet -- typically through a DSL or cable modem. Contact your local Internet Service Provider (ISP) for details. Step 1: Find a spot for your Wifi point Your primary Wifi point needs to be connected to a modem.
PAGE 6
Amber Wifi point has no internet connection Step 3: Get the App Download the Google Wifi app for Android 4.0 and up or iOS iOS 7 and up. For the Android app, search the Google Play store. For iOS, visit the Apple App Store. Step 4: Set up Wi-Fi To get started, open the Google Wifi app. On Android, your Wifi point will automatically be associated with the Google Account used with your phone. On iOS, the app will ask you to sign in with your Google Account or create a new one.
PAGE 7
○ After your Wifi points are setup, the app will download and install a software update, which includes the latest features and security measures. This can take up to 3 minutes. Your Wifi points will restart and your Wi-Fi network will be down until the Wifi points fully turn on.