Goebbels Thank you for choosing our product. Please read this manual carefully before operating, and retain it for the future reference. If you still have questions after reading this manual, please email us at: 1.1 important Safety Instructions This user manual contains important technical and safety instructions, it must be read attentively before using the battery charger to ensure personnel safety and reliable operation of this equipment.
Goebbels 13, Do not operate charger if it has received a sharp blow, burn dropped, or otherwise damaged in any way. 14, Do not disassemble charger, take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shack or fire. 15, To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning, Turning off controls will not reduce this risk.
O-Mode Selection Bunion ® Normal modes: 12V STD, 12V MAGMA, 12V GEL, 12V LFP; Additional function: 6V STD, SUPPLY * Press “Mode” button to select among the 4 Normal charging modes (12V STD, 12v MAGMA, 12V GEL, 12V LFF) ® Hold "Mode" button for 5 seconds to switch between Normal modes and Additional function # Press "Mode" button ta select between the 2 Additional function (6V STD, SUPPLY) @-1LD Display
Cold, 12V MAGMA means 12V AGM Or 12V Winter Soda ) & | 12vaGmyc | Suitable for charging a 12 AGM battery or charging in winter Cc 12V GEL D 12VLFP Display the current battery voltage and the change of battery voltage during charging. Accurate to 0.1V. E Battery ["BAT" indicates defective battery] ["FUL indicates fully charged] Voltage cares Reverse polarity or Short-circuit] indicates the battery voltage is too low] F §V STD G | Abnormal | Such as Reverse polarity or Short-circuit etc.
Tha Max Voltage Cortland Canvasser When Full Charged (max) Function 0... For charging a 12V standard 145 loa lead-acid battery. _ For charging a 12v AGM 148V 10A battery of charging in winter node. ra 143v 10A For charging a 12V GEL battery fie 146v 10a For charging 2 12V Lifelong ” battery. A..12 For charging a 8Y standard av 8 lead-acid battery.
4.2 Default All signs and back light are displayed Switch to Load-off mode after 2 seconds after booting Auto-Memory: The charger has built in auto-memory and will rectum to the last charge mode when connected( except for and ), To change modes after the first use, press the “Mode” button. 4.3 Battery Charging Process minks) Full charged and enter 100% | the maintenance mods 4.
4.6 Reverse and Short circuit Protection Short cultural protection: When the and poles of the battery clamp are connected, the output voltage will be muted off and the alarm icon on the screen flashes. Reverse connection protection: When the pole of the battery clamp is connected to the pole of the battery, and the pole of the battery clamp is connected to the pole of the battery, the output voltage will be muted off, and the alarm icon on the screen flashes. 5.
5.4 Charging (1) First make sure your battery 12V battery. Do not use 12V charge made to charge 6V batteries | (2) Then connect the battery charger to the battery with the correct polarity. If connected with reverse polarity or short-circuit at the clamps, the "Err" will be lit (3) Connect the battery charger to the AC power supply. (4) Select the appropriate charging mode for your batteries with the "Mode" button. (5) Refer to 2-1 Product Overview for a description of the individual operating modes.
[Error Code| Condition Possible Cause Solution “Err” “Bat” “Lo” The battery clamps are connected | Disconnect and reconnect Er abnormal with reverse polarity. the damps comely indicator P Confirm that battery voltage| The battery voltage is not matched matched with the charge with the selected charge mode.
Goebbels The equipment is supplied in packaging to prevent it from being damaged in trans The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection paint, you should ask in your local council offices.