S2 Micro Helicopter - Manual
Table Of Contents
step 11 步骤十一
16
EN
WWW.GOO-SKY.COM
十
(M1.4X3)x6
cross recessed mechanical
Jaw round head screw
!
CAUTION
Note:
1: First, fully fit the double-sided shock-absorbing sticker to the upper seat of the
battery compartment, and then install the flight controller.
2: The edge of the outgoing end of the flight control module is aligned with the
edge of the square groove, which is on the upper seat of the bottom battery
compartment (as shown in the blue line). And the left and right are centered.
3: The flight controller must be completely parallel to the fuselage to achieve the
best flight effect.
3M shock absorber
十 (M1.4X3mm)
cross recessed mechanical
Jaw round head screw
Flight control
( mm)
Flat bearing gasket
(Ø1.5*Ø3*0.3*0.6mm)x6
Flat bearing gasket
!
CAUTION