S2 Micro Helicopter - Manual
Table Of Contents
step 15 步骤十五
20
EN
WWW.GOO-SKY.COM
Socket screw
M2 screw sleeve
( mm)x4
Flat bearing gasket
M2
M2 Nut
!
CAUTION
Notice:
1: Each group of main propellers has been selected, weighed and matched before leaving the factory. When there are multiple pairs of main propellers at the same
time, multiple groups cannot be mixed and used. If the main propellers are mixed and used, it will cause the helicopter to fly unstable and abnormally vibrate, and
may lose control in severe cases.
2: When assembling the tail rotor, the fixing screw must not be locked too tightly. After locking, the tail rotor needs to be folded by hand. It is better to have a slight
damping feeling. The tightness of the two tail rotors should be the same. Inconsistent or too tight tightness will cause the body to vibrate and cause instability during
flight, and may lead to loss of control in severe cases. Please be careful, and develop pre-flight inspections and regular maintenance.
Socket screw
M2 screw sleeve
Socket screw
M2 screw sleeve
Main propeller
Main propeller
( mm)
Flat bearing gasket
( mm)
Flat bearing gasket
M2
M2 Nut
Flat bearing gasket
Flat bearing gasket