User Guide

24 25

In Time Lapse mode, you can capture a photo every 0.5 seconds.

CAPTURING TIME LAPSE PHOTOS

To capture a Time Lapse series, verify that the camera is in Time

Lapse mode. If the Time Lapse icon [

] does not appear in the

upper le on your camera status screen, press the Power/Mode

button repeatedly until it appears.

To Capture Time Lapse Photos:

Press the Shutter/Select button. The camera status lights ﬂash each

time a photo is taken.

To Stop Time Lapse Photos:

Press the Shutter/Select button. The camera status lights ﬂash three

times and the camera emits three beeps.

PRO TIP: With QuikCapture, you can quickly turn your camera

on and immediately begin capturing Time Lapse photos just by

pressing and holding the Shutter/Select button for two seconds. To

turn oﬀ QuikCapture, see QuikCapture (page 29).

/ Time Lapse Mode

In Settings mode [ ], you can change the video resolution and

change settings that apply to all camera modes.

NAVIGATING SETTINGS MENUS

With your HERO, you can navigate the settings menus using the

buttons on the camera.

To Navigate Settings Menus:

1. Press the Power/Mode button repeatedly to cycle to Settings

mode [

], then press the Shutter/Select button to select it.

2. Press the Power/Mode button repeatedly to cycle through the

various settings.

3. Press the Shutter/Select button to open a setting.

4. Press the Power/Mode button repeatedly to cycle through the

options for that setting.

5. Press the Shutter/Select button to select an option.

6. To exit, press the Power/Mode button to cycle to EXIT, and then

press the Shutter/Select button.

PRO TIP: To exit from the Settings menu at any time, press and hold

the Shutter/Select button for two seconds.

/ Settings Mode