User Manual

64 65
MAXIMISING BATTERY LIFE
Your HERO7 White has a built-in battery that can’t be removed. You’llget
a low battery message on the touch screen when the battery charge
drops below 10%.
If the charge runs out (or your SD card runs out of space) while recording
video, your camera will stop recording, save the video and turn itself o.
Here are some things you can do to maximise battery life:
Turn o Wireless Connections
Use the following settings:
QuikCapture (page 20)
Auto Power O (page 48)
Touch Screen (page 50)
RECORDING WHILE PLUGGED INTO A POWER SOURCE
You can use the USB-C cable that came with your camera to shoot
videosand photos while your camera is plugged in to a USB-charging
adaptor, the GoPro Supercharger, another GoPro charger or the GoPro
Portable Power Pack. This is perfect for capturing long videos and time
lapse events.
Even though your camera is plugged in, the battery will not charge
duringrecording. It will start charging when you stop recording.
Youcannot record while charging with a computer.
Heads Up: Because the door is open, your camera is not waterproof
whencharging.
PRO TIP: Fully charge your camera before storing it away to help maximise
battery life.
Battery Information
WARNING: Using a non-GoPro wall charger could damage
your camera battery and could lead to re or leakage. With
theexception of the GoPro Supercharger (sold separately),
only use chargers marked: Output 5V 1A. If you don’t know
your charger’s voltage and current, use the USB cable
includedto charge your camera with a computer.
BATTERY STORAGE + HANDLING
HERO7 White is full of sensitive components, including the battery.
Avoid exposing your camera to very hot or cold temperatures. Extreme
temperatures may temporarily shorten battery life or cause your camera
to temporarily stop working properly. Avoid dramatic temperature or
humidity changes, as condensation may form on or within the camera.
The built-in battery is non-serviceable. Contact GoPro Customer Service
for all battery-related problems.
Do not dry your camera with an external heat source such as a microwave
oven or hair dryer. Damage to the camera or battery caused by contact
with liquid inside the camera is not covered under the warranty.
Do not make any unauthorised alterations to your camera. Doing so may
compromise safety, regulatory compliance and performance, and may
void the warranty.
Battery Information