User's Manual

The option LAST configures camera to start up in mode active when camera was
last powered OFF.
ONE BUTTON [one button icon]
With One Button mode selected, the camera automatically begins recording video
as soon as powered ON.
[settings icon] To change One Button mode, verify camera is in Settings mode. If it
is not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through the Settings to locate [Set Up].
3. Press [S] to enter Set Up.
4. Use [mode] to cycle through to locate [one button icon].
5. Press [S] to enter One Button sub-menu.
6. Use [mode] to cycle through options.
7. Select highlighted option by pressing [S].
8. To exit One Button sub-menu, use [mode] to cycle to [EXIT], then press [S].
9. To exit Set Up, use [mode] to cycle to [EXIT], then press [S].
Note: When in One Button mode, camera will start taking video as soon as turned
on. To halt recording and keep camera on, press and hold [S] for two seconds. To
halt recording and turn camera off, press and hold [mode] for two seconds.
To turn One Button Mode OFF while the camera is operation (remember, since the
camera is in One Button mode it will be recording):
1. Press and hold the [S] until [icon] shows in the LCD window.
2. Press [S] once again.
3. Use the [mode] button to highlight OFF.
4. Select OFF by pressing [S].
NTSC/PAL
The NTSC and PAL settings govern video recording frame rate and playback when
viewing video on a TV/HDTV. Select NTSC when viewing on a TV in North America.
Select PAL if viewing on a PAL TV (most televisions outside of North America) or if
viewing on a PAL TV in any region.
NTSC default
1080p/30
1080p/24
960p/48
960p/30
720p/60
720p/30
WVGA/120