User's Manual

PAL
1080p/25
1080p/24
960p/50
960p/25
720p/50
720p/25
WVGA/120
ONSCREEN DISPLAY (OSD) [OSD icon]
To display or hide recording icons and file information on a video or viewing screen
during playback, turn Onscreen Display to ON or OFF.
[settings icon] To change Onscreen Display, verify camera is in Settings menu. If
it is not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through the Settings to locate [Set Up].
3. Press [S] to enter Set Up.
4. Use [mode] to locate [OSD icon].
5. Press [S] to enter OSD sub-menu.
6. Use [mode] to cycle through options.
7. Select highlighted option by pressing [S].
8. To exit OSD sub-menu, use [mode] to cycle to [EXIT], then press [S].
9. To exit Set Up, use [mode] to cycle to [EXIT], then press [S].
LED LIGHTS [LED icon]
Keep all four LED Indicator Lights active, only two active (front and back) or turn
OFF all lights.
4 (default)
2
OFF
[settings icon] To change LED Lights display, verify camera is in Settings menu. If
it is not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through the Settings to locate [Set Up].
3. Press [S] to enter Set Up.
4. Use [mode] to locate [LED icon].
5. Press [S] to enter LED Lights sub-menu.
6. Use [mode] to cycle through options.
7. Select highlighted option by pressing [S].
9. To exit LED Lights sub-menu, use [mode] to cycle to [EXIT], then press [S].
10. To exit the Set Up, use [mode] to cycle to [EXIT], then press [S].