User's Manual

PRO TIP: Activate One Button mode to have camera automatically begin recording
when powered ON. To halt recording and keep camera on, press and hold [S] for
two seconds. To halt recording and turn camera off, press and hold [mode] for two
seconds.
>See One Button mode for more information.
TAKING A PHOTO [photo icon]
Verify camera is in Photo mode. If it is not showing, press [mode] repeatedly until it
appears. The default photo size is 11 MP Wide.
The LCD screen displays [photo icon], FOV, photo resolution size (MP), number of
photos stored on the memory card, number of photos that can be taken before full,
and battery capacity.
To take a photo:
Press and release [S]. The camera will beep one time and the red LED Indicator
Lights will flash.
PHOTO BURST MODE [burst icon]
In Photo Burst mode the camera will take multiple photos in a short period of time.
The default setting is 10 photos in 1 second.
Verify camera is in Photo Burst mode. If it is not showing, press [mode] repeatedly
until it appears.
The LCD screen displays [burst icon], FOV, photo resolution size (MP), the Photo
Burst setting, number of photos stored on the memory card, number of photos that
can be taken before full, and battery capacity.
To take Photo Burst mode series:
Press and release [S]. The red LED Indicator Lights will flash and the camera will
beep 10 times.
Pro Tip: Tracking fast action subjects and want to improve your chance for nailing a
sharp shot? Set camera to Photo Burst and select best from the series.
TIME LAPSE PHOTO [time lapse icon]
Time Lapse Photo mode captures a series of photos at 0.5, 1, 2, 5, 10, 30 or 60
second intervals. When using 0.5 seconds, it is recommended to use Speed Class 10
or higher memory card. The default Time Lapse setting is 0.5 seconds.
Verify camera is in Time Lapse mode. If not showing, press [mode] repeatedly until
it appears.