User's Manual

[settings icon] To change Photo resolution, verify camera is in Settings menu. If
not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through Settings menu to locate [photo icon].
3. Press [S] to enter Photo menu.
4. Use [mode] to cycle through options.
5. Press [S] to select highlighted option.
6. To exit after making selection, use [mode] to cycle to [EXIT].
7. Press [S].
PHOTO BURST [burst icon]
Photo Burst mode produces a rapid-fire series of photos and can operate in one of
four different combinations.
[TABLE]
3 photos in 1 second
5 photos in 1 second
10 photos in 1 second (default)
10 photos in 2 seconds
[settings icon] To change Photo Burst mode, verify camera is in Settings mode. If
it is not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through Settings menu to locate [burst icon].
3. Press [S] to enter Burst menu.
4. Use [mode] to cycle through options.
5. Press [S] to select highlighted option.
6. To exit after making selection, use [mode] to cycle to [EXIT].
7. Press [S].
TIME LAPSE [time lapse icon]
Several time interval settings are available for Time Lapse mode photos, including
0.5, 1, 2, 5, 10, 30 and 60 seconds. After selecting the interval, specify whether to
optimize for VIDEO or STILLS
6
.
6
The recommend setting for videos is ON; for still photos is OFF