User Manual

76 77
ADVANCED CONTROLS
ISO Minimum
ISO Maximum
ISO Minimum and ISO Maximum let you set a range for the camera’s
sensitivity to light and image noise. ISO settings create a balance between
brightness and resulting image noise. Image noise refers to the degree of
graininess in the image.
In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in darker images with lower image noise.
When you change this setting, the touch display immediately shows you
the eect on your image. The default for ISO Maximum is 1600 for video
and 3200 for photos. The default for ISO Minimum is 100.
For the Video and Photo capture modes, ISO behavior depends on the
Shutter setting (in Protune). The ISO Maximum that you select is used
as the maximum ISO value. The ISO value that is applied might be lower,
depending on the lighting conditions.
PRO TIP: To lock the ISO at a specic value, set ISO Minimum and ISO
Maximum to the same values.
Darker image
Lower image noise
Brighter image
Greater image noise
100 200 400 800 1600 3200 6400
ADVANCED CONTROLS
Shutter
The Shutter setting in Protune applies only to the Video and Photo
capture modes. This setting determines the amount of time that the
shutter is open. When you change this setting, the touch display
immediately shows you the eect on your image. The default setting is
Auto.
For Photo, the options for this setting are Auto, 1/125, 1/250, 1/500,
1/1000, and 1/2000 second.
For Video, the options for this setting depend on the FPS setting, as
noted below.
Settings
Example 1:
1080p30
Example 2:
1080p60
Auto Auto Auto
1/FPS 1/30 sec 1/60 sec
1/(2xFPS) 1/60 sec 1/120 sec
1/(4xFPS) 1/120 sec 1/240 sec
1/(8xFPS) 1/480 se c 1/960 sec
PRO TIP: To reduce the amount of blur in your video and photos when
using the Shutter setting, mount your camera on a tripod or other surface
that is stable and cannot move.