User Manual
80 81
WARNING: Always use a helmet that meets applicable safety
standards if you’re using a GoPro helmet mount or strap.
Choose the right helmet for your sport or activity, and make
sure that it’s the right size and t for you. Check to see
that your helmet’s in good condition, and always follow the
manufacturer’s instructions on safe use.
Replace any helmet that’s had a major impact. No helmet can
protect against injury in every accident. Be safe.
USING YOUR GOPRO IN + AROUND WATER
HERO7 Black is waterproof to 33ft (10m) with the door closed. You won’t
need an additional housing before diving in.
The touch screen was designed to work when wet, but you may need to
wipe it o if it has trouble sensing your commands. You can also navigate
with your camera’s buttons if you’re under water. To learn more, see
Navigating with the Buttons (page 21).
Heads Up: The Frame does not provide additional waterproof protection.
PRO TIP: Use a camera tether and a Floaty (sold separately) to keep
your camera aoat in case it detaches from the mount.
To capture extreme adventures down to 196ft (60m), pick up the
GoPro Super Suit (Protection + Dive Housing), sold separately.
For more information on Camera Tethers, Floaty, and Super Suit,
visit gopro.com.
Mounting Your GoPro
There might be times when you need to remove your camera’s door.
This can include when you want to charge it while it’s in The Frame.
WARNING: Only remove the door in a dry, dust-free
environment. The camera is not waterproof when the
door is open or removed.
REMOVING THE SIDE DOOR
1. Hold down the Latch Release button and slide the door open.
2. Pull the door o.
Removing the Side Door