User Manual

100 101
AUTO LOW LIGHT
HERO7 Black can tell if there isn’t enough light for your shot and
automatically lower the frame rate to improve video quality. This is
especially helpful when you’re moving in and out of low-light conditions.
Auto Low Light is set to Auto by default. It works with all resolutions
when shooting at 50 or 60 fps.
Turning O Auto Low Light
1. From the Video screen, tap the settings.
2. Tap Low Light.
LOOPING INTERVAL
You can set your GoPro to record 5 (default), 20, 60, or 120 minute loops.
It can also be set to MAX, which will record until your SD card is full
before looping back to record over the start of the video.
Tech Specs: Video
Unstabilized
The following resolutions and settings cannot be stabilized due to ultra
high frame rates and other factors:
Video
Resolution
(RES)
FPS
(NTSC/
PAL)
*
FOV
Screen
Resolution
Aspect
Ratio
4K 30/25 Wide 3840x2160 4:3
2.7K 120/100 Wide 2704x1520 16:9
1080p 240/200 Wide 1920x1080 16:9
960p 240/200 Wide 1280x960 4:3
720p 240/200 Linear, Wide 1280x720 16:9
*
NTSC and PAL refer to the video format, which depends on the region
that you’re in. To learn more, see Video Format (page 69).
TURNING OFF VIDEO STABILIZATION
Video stabilization is on by default, but you can turn it o.
1. From the Video screen, tap the settings.
2. Tap Stabilization.
Tech Specs: Video