User's Manual

32 33
SETUP MENU
Set Up allows advanced customization options to be made to the camera
that will ease video and photo capture.
ICON LAST/STARTUP DEFAULT SETTING
Set which camera mode is immediately active when camera is powered ON.
TABLE xxxx
xxx xxxxxx
To adjust LAST/STARTUP setting, verify camera is in Settings
menu. If
is not showing, press repeatedly until it appears.
1. Press
to enter menu.
2. Use
to cycle through Settings to locate .
3. Press
to enter Setup.
4. Use
to locate [default ICON].
5. Press
to enter LAST/STARTUP sub-menu.
6. Use
to cycle through options.
7. Press
to select highlighted option.
8. To exit, hold down
for two seconds.
Note:
Option LAST configures camera to start up in mode active when camera was last powered OFF.
ONE BUTTON MODE
With One Button mode selected, camera automatically begins recording video
as soon as powered ON.
OFF (default)
ON
To turn One Button mode ON, verify camera is in Settings menu. If
is not showing, press repeatedly until it appears:
1. Press
to enter menu.
2. Use
to cycle through Settings to locate .
3. Press
to enter Set Up.
4. Use
to cycle through to locate .
5. Press
to enter One Button sub-menu.
6. Use
to cycle through options.
7. Press
to select highlighted option.
8. To exit, hold down
for two seconds.
(continued on next page)
cHanGInG settInGs: setUP cHanGInG settInGs: setUP
HERO3_UM_silver_Edition_ENG_MASTER.indd 32-33 9/19/12 1:01 PM