User's Manual
14 15
UsInG yoUr Hero3: caMera MoDesUsInG yoUr Hero3: caMera MoDes
PHOTO BURST
In Photo Burst mode camera takes multiple photos in a short period of time. Default
Photo Burst setting is 10 photos in 1 second.
To take a Burst Photo series, verify camera is in Photo Burst mode. If
not
showing, press
repeatedly until it appears.
The LCD screen displays , FOV, photo resolution size (MP),
default Burst Photo mode setting, number of photos stored on
memory card, number of photos that can be taken before full and
battery capacity.
To take a Burst Photo series:
Press and release
. Red LED Indicator Lights flash and camera beeps ten times.
PRO
TIP:
Tracking fast action subjects and want to improve your chance
for nailing a sharp shot? Set the camera to Burst Photo and
select best from the series.
TIME LAPSE PHOTO
Time Lapse Photo mode captures a series of photos at 0.5, 1, 2, 5, 10, 30
or 60 second intervals (when using the 0.5 seconds, a Speed Class 10 rating is
recommended). The default Time Lapse Photo setting is 0.5 seconds.
To take a Time Lapse photo series, verify camera is in Time Lapse Photo mode. If
not showing, press repeatedly until it appears.
The LCD screen displays , FOV, photo resolution, Time Lapse
Photo setting, number of photos stored on memory card, number of
photos that can be taken before full and battery capacity.
To take Time Lapse Photos:
Press and release . Camera initiates countdown and red LED Indicator Lights
flash each time a photo is taken.
To stop Time Lapse Photos:
Press and release . Red LED Indicator Lights flash three times and camera emits
three beeps to indicate that Time Lapse Photo has stopped.
See TIME LAPSE PHOTO for more instructions on how to change interval settings.
HERO3_UM_silver_Edition_ENG_MASTER.indd 14-15 9/19/12 1:01 PM