User manual
100 101
Setting Your Preferences
Swipe down on the rear screen to access the Dashboard, and then
swipe left to access your GoPro's preferences.
WIRELESS CONNECTIONS
Connect your GoPro to the GoPro Quik app, choose your Wi-Fi band,
and more.
Wireless Connections
Turn your camera’s wireless connections on and o.
Connect Device
Choose to connect to the GoPro Quik app or The Remote.
To learn more, see Connecting to the GoPro Quik App (page 92).
Camera Info
See your camera’s name and password.
Wi-Fi Band
Choose 5GHz or 2.4GHz as your connection speed. Set 5GHz only if
your phone and region support it.
To learn more, see Setting the Connection Speed (page 93).
Reset Connections
Clear all connections to your devices and reset your camera’s password.
This means you’ll have to reconnect each device.
GENERAL
Here’s everything you’ll find under General settings:
Beep Volume
Choose High, Med (default), Low, or Mute. The volume you set here
can be toggled on or o using the Dashboard.
QuikCapture
QuikCapture is on by default. You can turn it o here. It can also be
toggled on or o using the Dashboard.
Default Preset
Set the preset your GoPro captures in when you turn it on using the
Mode button
. This setting does not aect QuikCapture.
Auto Power O
Choose 5 Min, 15 Min (default), 30 Min, or Never.
LEDs
Set which status lights blink. Choose All On (default), All O,
or Front O Only.
Anti-Flicker
Choose the regional frame rate for recording and playback on a TV.
Set 60Hz (NTSC) for North America. Try 50Hz (PAL) if you’re outside of
North America. The right format for your region will help prevent flicker
on a TV/HDTV when you play back video that was recorded indoors.
Setting Your Preferences