Operation Manual

34 35
set UP
MONTH / DAY / YEAR / TIME
Set the HERO3 clock to ensure Video and Photo files are saved with the
correct date and time.
To change Month/Day/Year/Time:
1. Verify the camera is in Settings mode. If the Settings icon on your
camera’s LCD screen
is not showing, press repeatedly until it appears.
2. Press
to enter menu.
3. Use
to cycle through Settings to locate .
4. Press
to enter Set Up.
5. Use
to locate .
6. Press
to enter Month/Day/Year/Time sub-menu; Month (MM) will
be highlighted.
7. Press
to access the list of months (1 to 12).
8. Use
to cycle through list until desired selection is highlighted.
9. Press
to select.
10. To advance to the next option, press
.
11. Repeat steps 7, 8 and 9 to make selections for day (DD), year (YY), hour
(HH) and minutes (MM).
12. To exit, hold down
for two seconds or cycle through to and
press
.
Note: If the battery is removed from the camera for an extended period of time
MONTH/DAY/YEAR/TIME will need to be set again.
set UP
EXIT
From the EXIT screen, press
to exit the Set Up menu.
PRO
TIP:
If at anytime you wish to exit from the SET UP MENU, press
and hold
for two seconds.