Operation Manual
Mount your GoPro to standard
U.S. 5/8”-27 mic stands. Includes
an adapter for European 3/8”-16
mic stands.
MIC STAND MOUNT
SIDE MOUNTING
VERTICAL MOUNTING
/ Mounting Your Camera
REMOVABLE INSTRUMENT MOUNTS
These easy-to-remove, non-damaging
adhesive mounts are safe for use on
most instrument surfaces.
Note: The mount’s adhesive strip cannot be re-used aer removal, so double check your mounting
location before applying.
To Install
Step 1
Peel off the adhesive strip’s backing.
Step 2
Place mount on clean surface and
press firmly for 10 seconds.
To Remove
Step 1
Do NOT pull tab upward. Doing so
may damage the mounting
surface.
Step 2
Li mount gently while slowly
pulling tab parallel to surface.
Failure to hold mount may cause it
to snap back at you.
/ Mounting Your Camera
WARNING: Do not use on highly fragile or irreplaceable items. Failure to
follow instructions may cause damage or injury. Adhesive may occasionally
leave non-damaging residue that can be easily removed with a so cloth.