Operation Manual

40 41
PHOTO SETTINGS
For instructions on changing settings, see Navigating Settings Menus
(page 19).
INTERVAL
This setting applies only to Time Lapse mode. Interval determines the
amount of time that passes between each captured frame. Available
intervals for Time Lapse range from 0.5 seconds (default) to 60
seconds.
Interval Examples
0.5-2 seconds Surfing, biking, or other sport
2 seconds Busy street corner
5-10 seconds Sunset
10-60 seconds
Lengthy activities, such as construction
projects
/ Settings
SPOT METER
This setting applies to all photo capture modes: Photo, Burst,
and Time Lapse. Spot Meter is good for capturing photos where
the lighting is different from where you are, such as capturing the
outdoors from within a car or capturing a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image. When Spot Meter is turned
on, [
] appears on the camera displays. The options for this
setting are Off (default) and On.
Note: Changes that you make to the Spot Meter setting in one mode (Photo, Burst, or Time Lapse)
apply only to that mode. To adjust this setting for another mode, adjust the setting within that mode.
/ Settings