User manual

54 55
Spot Meter
Spot Meter is good for capturing photos in a setting where the lighting
is different from where you are. Examples include capturing photos
of the outdoors from within a car or in a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image, rather than on the entire
frame. The options for this setting are Off (default) and On.
Note: Changes that you make to Spot Meter in Multi-Shot settings apply only to multi-shot capture.
To adjust this setting for video capture, adjust Spot Meter in Video settings. To adjust this setting for
photo capture, adjust Spot Meter in Photo settings.
/ Multi-Shot Settings
SETUP MODE SETTINGS
In Setup mode, you can change settings that apply to all camera
modes. To change a setting in this mode, your camera must be
connected to the GoPro App for mobile or a GoPro remote. For more
information, see Accessing All Modes and Settings (page 32).
When you disconnect your camera from the app or the remote, your
camera saves the settings.
/ Setup Mode