User's Manual

52 53

/ Using the Mounts

ATTACHING YOUR CAMERA TO MOUNTS

To attach your HERO+ LCD camera to a mount, you need a

Mounting Buckle, thumb screw or hardware, depending on the mount

you are using.

For more information on mounts, visit gopro.com.

Slim housing surfboard mount installation

Slim housing remove camera

Slim housing insert camera

Slim housing closed Swapping housing doors

Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit

Mounting Buckle Thumb Screw Camera Complete Unit

USING CURVED + FLAT ADHESIVE MOUNTS

The Curved + Flat Adhesive Mounts make it easy to attach the camera

to curved and ﬂat surfaces of helmets, vehicles, and gear. Using the

Mounting Buckle, the assembled camera housing can be clicked on

and oﬀ the secured Curved or Flat Adhesive Mounts.

Flat Adhesive Mount Curved Adhesive Mount

/ Using the Mounts

MOUNTING GUIDELINES

Follow these guidelines when attaching mounts:

• Attach the adhesive mounts at least 24 hours prior to use. Allow

72 hours for complete adhesion.

• Adhesive mounts must be mounted only on smooth surfaces.

Porous or textured surfaces do not enable a proper bond. When

applying the mount, ﬁrmly press it into place and ensure full

contact over the entire surface.

• Apply adhesive mounts to clean surfaces only. Wax, oil, dirt or

other debris reduce adhesion, which can result in a weak bond

and risk of losing the camera should the connection fail.

• Attach adhesive mounts in room temperature conditions.

Mount adhesives do not bond properly if applied in cold or damp

environments to cold or damp surfaces, or if the surface is not

room temperature.

For more information on mounts, visit gopro.com.

WARNING: If using your camera with a GoPro helmet mount or

strap, always select a helmet that meets the applicable safety

standard.

Choose the right helmet for your particular sport or activity

and make sure that it is the right ﬁt and size for you. Inspect

your helmet to ensure that it is in good condition and follow the

helmet manufacturer’s instructions on safe helmet use.

Any helmet that has sustained a major impact should be

replaced. No helmet can protect against injury in every accident.