User's Manual
8 9
/ Getting Started/ Getting Started
CHARGING THE BATTERY
The integrated battery comes partially charged. No damage occurs to
the HERO+ LCD camera or battery if used before being fully charged.
1. Unlatch and open the backdoor.
Note: The camera cannot be removed from the housing.
2. Charge the battery using the included USB cable.
Note: The battery cannot be removed from the camera. When charging the camera with a
computer, be sure that the computer is connected to a power source. If the camera status
lights do not turn on to indicate that the battery is charging, use a different USB port.
Slim housing surfboard mount installation
Slim housing remove camera
Slim housing insert camera
Slim housing closed Swapping housing doors
Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit
NOTICE: Only use USB charging adapters marked 5V 1A. If you do not
know the voltage and amperage of your charger, use the included
USB cable to charge the camera from your computer.
For fastest charging, make sure the camera is powered off aer
connecting it to a computer or USB charging adapter. When the
camera is powered off, the camera status light turns on during
charging and turns off when charging is complete.
For more battery information, see Battery (page 55).
WARNING: Use caution when using your GoPro as part of your
active lifestyle. Always be aware of your surroundings to avoid
injury to yourself and others.
Abide by all local laws when using your GoPro and related
mounts and accessories, including all privacy laws, which may
restrict recording in certain areas.