User's Manual
22 23
PAIRING WITH THE REMOTE
The Smart Remote lets you change capture modes and settings,
power your GoPro on/off, start/stop recording, and add HiLight Tags.
To Pair with the Remote:
1. On HERO4 Session, short press the Camera Status/Wireless
button repeatedly to cycle to Rem Ctrl, then short press the
Shutter/Select button [
] to select it. The camera automatically
begins pairing.
2. Put the remote into pairing mode. For more information, see the
user manual for your remote at gopro.com/getstarted.
/ Accessing Camera Settings
CONNECTING AFTER PAIRING
Aer connecting your camera to the GoPro App or the remote for the
first time, you can connect in the future through the wireless menu.
To Connect Your Camera aer Pairing:
1. Short press the Camera Status/Wireless button to open the
wireless menu.
2. If needed, short press the Camera Status/Wireless button again
to display the setting that you want (GoPro App or Rem Ctrl), and
then short press the Shutter/Select button [
] to select it.
The wireless status lights blink when wireless is on and the camera
is not recording.
Note: If your smartphone/tablet has Bluetooth
©
LE, the wireless options are combined as RC/App.
/ Accessing Camera Settings