LCD BacPac ™ User Manual + Warranty Info
Firmware Update To determine if a firmware update is required, please follow these steps: • W ith the camera fully charged, attach the LCD BacPac™ to camera and power camera on (see attachment instructions on page 4). If the LCD screen powers on, you have the latest firmware and no update is needed. • If the LCD BacPac does not power on, then you will need to download and install the latest firmware for your camera at: gopro.com/firmware.
LCD BacPac Features 1. S eamlessly attaches to the back of HD HERO cameras. 2. LCD screen allows for easy visual control of camera and settings. 3. Fast forward + fast rewind photos and video. 4. Integrated speaker for sound.
ASSEMBLING YOUR LCD SCREEN to HD HERO Attaching LCD BacPac to HD HERO 1. Slide hooked end of the BacPac (A) into the groove on the right side of the camera body (B). 2. Push BacPac connector (C) into the HERO Bus port (D) on the back of the camera. Removing LCD BacPac from HD HERO 1. Pull back on left side of BacPac marked with the arrow to disconnect from the HERO bus port. 2. Slide hooked end of BacPac (A) out of camera groove (B).
Swapping housing doors To secure the HD HERO & LCD BacPac assembly into the housing, you will need to replace the standard back door with one of the included extended back doors. A total of 4 doors are supplied with the LCD BacPac; 2 waterproof doors (standard + wrist housing models) and 2 non-waterproof doors (standard and wrist housing models). The skeleton doors allow for better audio and camera cooling when waterproofing is not needed. 1.
USING THE LCD BacPac The camera’s default setting keeps the LCD screen powered on. Below are options to change how the LCD powers off. Camera set menu OPTIONS — LCO and LCF Check Page 2, section “Firmware Update”, to ensure your camera has the necessary firmware update for your LCD screen. If so, proceed to Steps 1 & 2 below: 1. LCO (default): LCD ON. This setting keeps the LCD screen powered on, continuously, while the camera is on.
Adjust LCD screen brightness 1. Press and hold LCD button for 2 seconds to enter LCD menu. 2. Press power/mode button twice to highlight ‘BRIGHTNESS’ menu button. 3. Press shutter button repeatedly to adjust brightness. Playback Photos 1. Press and hold LCD button for 2 seconds to enter LCD menu. 2. Press power/mode button once to highlight ‘PHOTO’ menu option. 3. Press shutter button and the first recorded photo will automatically be displayed. 4. Press power/mode button to advance to the next photo.
Playback Videos 1. Press and hold LCD button to enter LCD menu. 2. ‘VIDEO’ should already be highlighted. 3. Press shutter button and the first recorded video will automatically start playing. 4. During video playback, press and HOLD the power/mode button to Fast Forward the video playback. Releasing the power/mode button will resume normal playback. 5. During video playback, press and HOLD the shutter button to Rewind the video playback. Releasing the button will resume normal playback.
Important Safety and Handling Information WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the LCD BacPac or other property. Handling The LCD BacPac contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the LCD BacPac.
Avoiding Water and Wet ENVIRONMENTS when not in Housing When not protected in the waterhousing, do not use the LCD BacPac in rain, or near washbasins or other wet locations. Take care not to spill any food or liquid on the LCD BacPac. In case the LCD BacPac gets wet, turn off and unplug from camera before cleaning, and allow it to dry thoroughly before using again. Do not attempt to dry the LCD BacPac with an external heat source, such as a microwave oven or hair dryer.
Warranty This product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. GoPro’s sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product at GoPro’s sole discretion. Except for such replacement, the sale, or other handling of this product is without warranty, condition or other liability even though the defect or loss is caused by negligence or other fault.
Learn about more GoPro products at: gopro.
