Operation Manual

30 31
INTERVAL
Interval applies only to Time Lapse and Night Lapse. Interval determines
the amount of time that passes between each captured frame.
Time Lapse Intervals
Available intervals for Time Lapse range from 2 seconds (default) to 60
seconds.
Interval Examples
2 seconds Busy street corner
5-10 seconds Sunset
10-60 seconds
Lengthy activities, such as
construction projects
Night Lapse Intervals
Available intervals for Night Lapse range from 4 seconds to 60 minutes.
Continuous (default) causes the Interval to match the Shutter setting. For
example, if Shutter is set to 10 seconds and Interval is set to continuous,
your camera captures a photo every 10 seconds.
MEGAPIXELS
With Omni, each HERO4 Black captures photos at 12MP.
MULTI-SHOT MODE SETUP MODE
Setup mode contains settings for wireless and settings to customize your
camera . For instructions on how to change the following settings, see
Navigating Settings Menus (page 21).
WIRELESS
For Omni, this setting applies only to the primary camera. Wireless must
be off for all secondary cameras.
When the primary camera’s Wireless is on, a Wireless status icon appears
on the camera status screen and the blue wireless lights on the camera
blink intermittently. The default setting for Wireless is off.
Setting Description
PAIR
Lets you pair your primary camera to a
GoPro remote. For more information,
see Smart Remote (page 40).
MODE
After pairing, Mode lets you connect the
primary camera to a GoPro remote.
PRO TIP: If you forgot your camera’s name or password, use the Camera
Reset setting (Reset Wi-Fi option) in the primary camera’s Setup mode to
reset them to the defaults. The default password is goprohero.
DEFAULT MODE
You can select the capture mode that appears when the camera powers
on. The options are Video, Time Lapse Video and Single Photo.