Operation Manual

32 33
SETUP MODE SETUP MODE
LEDS
This setting determines which camera status lights (red) to activate. The
options for this setting are 4 (top, bottom, front, back), 2 (front and back),
or off (none). The default setting is 4.
Note: The Wireless status light (blue) is always activated unless you select off for
this setting.
BEEPS
You can set the volume for the sound indicators to be 100% (default),
70% or off.
VIDEO FORMAT
The Video Format setting governs frame rates for recording and playback
when viewing video on a TV/HDTV.
Setting Description
NTSC (default) Viewing video in North America
PAL
Viewing video on a PAL TV/HDTV (most
televisions outside of North America)
DATE/TIME
This setting lets you set the date and time. If the battery is removed
from the camera for an extended period of time, you must reset the
date and time.
DELETE
This setting lets you delete the last file, or delete all files and format
the memory card. Deleting all files is useful after you transfer your files
to your computer and want to make room on your memory card for more
content. LED lights blink until the operation is complete.
NOTICE: If you select All/Format, the memory card is reformatted, which
deletes every file on the card. If you select this option from the primary
camera, memory cards in all cameras are reformatted.
CAMERA RESET
With this setting, you can reset your camera’s settings to their default val-
ues. This option retains the Date/Time setting, and remote control pairing.