Operation Manual

40 41
SMART REMOTE BATTERY
The Smart Remote can control your cameras from up to 600’ (180m)
away in optimal conditions with a clear line of sight between the Smart
Remote and the Omni. To use the Smart Remote with Omni, pair it only
with the primary camera. You can then control all 6 cameras remotely.
For information about connecting the Smart Remote to your HERO4
Black cameras, see the Smart Remote User Guide at gopro.com/help.
Note: You cannot use more than one Smart Remote with Omni or control more than one
Omni with a Smart Remote.
MAXIMIZING BATTERY LIFE
The battery icon on the camera screen blinks when the battery drops
below 10%. If the battery in any of the cameras reaches 0% while
recording, the camera saves the file and the array powers off.
Extreme cold temperatures can decrease battery life. To maximize battery
life in cold conditions, keep the camera in a warm place prior to use.
CHARGING INFORMATION
The battery charges to 100% in approximately two hours when using
GoPro’s USB-compatible Wall or Auto Charger (both sold separately).
When charging with a computer, be sure that the computer is connected
to a power source. If the camera status light does not turn on, use a
different USB port.
The included lithium-ion battery comes partially charged. No damage
occurs to the camera or battery if used prior to a full charge.
You can also charge the battery outside the camera using the HERO4
Dual Battery Charger (sold separately).
WARNING: Using a wall charger other than a GoPro Wall
Charger can damage the GoPro battery and could result in fire
or leakage. Only use chargers marked: Output 5V 1A. If you
do not know the voltage and current of your charger, use the
included USB cable to charge the camera from your computer.