Operation Manual

44 45
IMPORTANT MESSAGES IMPORTANT MESSAGES
MICROSD CARD MESSAGES
If you cannot capture video, one of the microSD cards may be missing,
full, or experiencing an error.
NO SD
No card present. The camera requires a
microSD, microSDHC or microSDXC card (sold
separately) to capture videos.
FULL Card is full. Delete files or swap card.
SD ERR
Camera is unable to read card formatting.
Reformat the card in the camera.
PRO TIP: Reformat your microSD cards before each shooting session to
ensure that the cards remain in good condition.
ARRAY ERROR
If Array Error appears on the primary camera, check the
secondary cameras for errors and improper connections.
To identify the secondary camera that is experiencing
the error, refer to its light on the inner cube.
• No light on the inner cube:
• The camera has no battery installed or the battery
needs charging
• The camera is not running array camera firmware
or is running a different firmware version than the
other cameras in the array
• Red light on in the inner cube is blinking:
• The camera has no microSD card
• The camera’s microSD card has an error
Be sure to resolve any issues before attempting
to record.
FILE REPAIR ICON
If your last video file was corrupted during recording,
the camera displays the File Repair icon while it tries to
repair the file. When this process is finished, press any
button to continue using the camera.
TEMPERATURE ICON
The Temperature icon appears on the camera status
screen when the camera becomes too hot and needs to
cool down. If this happens with a camera in Omni, let it
sit and cool for 20 minutes before attempting to use it
again. Your camera was designed to identify conditions
of overheating and is designed to respond accordingly.