Operation Manual

14 15
GETTING STARTED GETTING STARTED
WARNING: Use caution when using your GoPro as part of
your active lifestyle. Always be aware of your surroundings
to avoid injury to yourself and others.
Abide by all local laws when using your GoPro and related
mounts and accessories, including all privacy laws, which
may restrict recording in certain areas.
MOUNTING OMNI
1. If you want to use the top 1/4-20 threaded insert, unscrew the
corner cap.
2. Use a 1/4”-20 screw with the threaded insert on the top or bottom of
the rig (near the power connector) to attach Omni to a monopod or
other suitable mounting solution.
NOTICE: When removing Omni from a monopod or other mounting
solution, disconnect the power connector first to avoid damaging
the connection.
POWERING ON + OFF ALL CAMERAS IN THE ARRAY
To Power On All Cameras:
Press the Power/Mode button [ ] on the
primary camera. The camera status lights flash three
times and the sound indicator emits three beeps.
The primary camera powers up, followed by the
secondary cameras. When Array Ready disappears,
you can begin capturing video or photos.
The array is properly configured if the camera mode
icon and AR alternate in the upper left of the camera
status screen.
If Array Error appears on the primary camera’s status screen, see Array
Error (page 44).
To Power Off All Cameras:
Press and hold the Power/Mode button [ ] on the primary camera for
three seconds. The camera status lights flash several times and the sound
indicator emits seven beeps.