USER GUIDE Smart Remote LONG-RANGE REMOTE CONTROL FOR YOUR GOPRO.
To download this user guide in a different language, visit gopro.com/support. Pour télécharger ce manuel de l’utilisateur dans une autre langue, rendez-vous sur gopro.com/support. Wenn Sie dieses Benutzerhandbuch in einer anderen Sprache herunterladen möchten, besuchen Sie gopro.com/support. Per scaricare questo manuale utente in un’altra lingua, visita gopro.com/support. Para descargar este manual de usuario en otro idioma, visite gopro.com/support.
/ The Basics Remote Status Display Status Light Shutter/Select Button Power/Mode Button Settings/Tag Button Charging Port/ Attachment Key Slot Wrist Strap Attachment Key Attachment Ring USB Charging Cable 3
/ Wearing the Smart Remote ATTACHING THE REMOTE TO THE STRAP The attachment strap secures the remote to your wrist, backpack straps, ski poles, bike frames and more. To Attach the Remote to the Strap: Step 1 Thread the strap through the slots on the back of the remote. 4 Step 2 Position the remote along the strap as shown.
ATTACHING THE REMOTE USING THE KEY + RING The attachment key and ring secure the remote to your lanyards, straps, car keys, zippers and more. To Attach the Remote Using the Key and Ring: Step 1 Slide and hold the latch lever in the direction of the arrow (A), then pull the key out of the remote (B). B A Step 2 Attach the ring to your lanyard, straps, etc. Step 3 Push the attachment key into the key slot until it clicks.
/ Getting Started The Smart Remote lets you power your GoPro on/off, start/stop recording and change camera settings. The display, status light, Power/Mode button ], Shutter/Select button [ ] and Settings/Tag button* [ ] behave [ in the same way as those on your camera. The Smart Remote is waterproof to 33’ (10m). However, wireless connectivity does not work under water, so the remote and cameras do not remain connected if submerged. * The Settings/Tag button is available only on HERO4 cameras.
CHARGING THE SMART REMOTE We recommend charging your Smart Remote for one hour before using it the first time. No damage occurs if it is used before being fully charged. You can use the remote while it is charging. The status display shows the remote’s battery level while the remote is powering on or charging. Note: When the remote is searching for a camera, the battery drains faster. If you are not using the remote during charging, be sure to turn it off to conserve battery power.
To Charge the Remote: B A Step 1 Slide and hold the latch lever in the direction of the arrow (A), then pull the key out of the remote (B). 8 Step 2 Plug the charging cable into the charging slot until it clicks.
Step 3 Connect the other end of the cable to a computer or other USB power source. The charging icon on the remote status display shows a full battery when charging is complete. Note: Be sure that the computer is connected to a power source. If the remote status display does not indicate that the remote is charging, use a different USB port.
POWERING THE REMOTE ON/OFF To Power On the Remote: ]. Press the Power/Mode button [ To Power Off the Remote and Connected Cameras: ] for two seconds. Press and hold the Power/Mode button [ Note: If the cameras are recording, this action powers off only the remote. The cameras continue recording. PRO TIP: You can power off the remote and leave the camera powered on. This option is useful if you want to switch from the remote to the GoPro App to control your camera.
REMOTE STATUS DISPLAY The information that appears on your Smart Remote status display depends on whether you are connected to multiple cameras. Smart Remote Connected to One Camera: Remote screen displays the same information as the GoPro camera status screen. Available modes are the same as those on the camera. Smart Remote Connected to Multiple Cameras: Remote screen displays the number of cameras connected, the recording mode and the battery status of the remote.
When the remote is connected to multiple cameras, these modes are available: Default Startup Modes Sets all cameras to their default power-up modes Video Sets all cameras to Video mode Photo Sets all cameras to Photo mode Burst Sets all cameras to Burst mode Time Lapse Sets all cameras to Time Lapse mode SMART REMOTE SOFTWARE UPDATE When software updates are available for the remote, you are automatically notified when you connect the remote to a camera.
/ Pairing the Remote and Your GoPro You can pair the Smart Remote with any wireless-enabled GoPro camera. The remote can control your camera from up to 600’ (180m) away in optimal conditions. You can control up to 50 GoPros at a time with the remote. Your camera recognizes only one remote at a time. The distance from which you can control your camera with the remote varies and depends on factors such as terrain, weather, obstructions and electromagnetic interference.
To Pair Your Remote and Your HERO4: 1. Ensure that both camera and remote are powered off. 2. On your camera, complete these steps: ] to power on your camera. a. Press the Power/Mode button [ b. Press the Power/Mode button [ ] to cycle to Setup mode, and ] to select it. then press the Shutter/Select button [ c. Press the Power/Mode button [ ] to cycle to Wireless, and then ] to select it. press the Shutter/Select button [ ] to cycle to WiFi RC (or RC & d. Press the Power/Mode button [ ] to select it.
camera, it automatically begins pairing. Otherwise, press and hold the Settings/Tag button for four seconds to begin pairing. ] appears on both screens once the devices A checked box [ are paired. b. To connect additional cameras, press the Shutter/Select button ] to select Yes, and then repeat the pairing process. [ ] to cycle c. When you are finished, press the Power/Mode button [ ] to select it.
To Pair Your Remote and Your HERO3+ or HERO3: 1. Ensure that both camera and remote are powered off. 2. On your camera, complete these steps: ] to power on your camera. a. Press the Power/Mode button [ b. Press the Wi-Fi On/Off button [ ] twice to turn on Wi-Fi and access the Wi-Fi menu. ] to open the Wi-Fi menu [ ]. c. Press the Shutter/Select button [ ] to cycle to Wi-Fi RC, and then d. Use the Power/Mode button [ ]. press the Shutter/Select button [ e.
3. On the remote, complete these steps: a. Power on the remote. If the remote was never paired with a camera, it automatically begins pairing. Otherwise, press and hold the Settings/Tag button for four seconds to begin pairing. ] appears on both screens once the devices A checked box [ are paired. b. To connect additional cameras, press the Shutter/Select button ] to select Yes, and then repeat the pairing process. [ c. When you are finished, press the Power/Mode button [ ] to cycle ] to select it.
/ Connecting the Remote and Your GoPro After your remote and camera are paired, follow the steps below to connect them in the future. With this procedure, your camera connects to the remote that it connected to most recently. To Connect the Remote and Your HERO4: 1. Power on the remote and your camera. 2. On your camera, complete these steps: ] to cycle to Setup mode, and a. Press the Power/Mode button [ ] to select it. then press the Shutter/Select button [ b.
d. Press the Power/Mode button [ ] to cycle to Existing, and ] to select it. then press the Shutter/Select button [ To Connect the Remote and Your HERO3+ or HERO3: 1. Power on the remote and your camera. 2. On your camera, complete these steps: ] twice to turn on Wireless and a. Press the Wireless button [ open the Wireless settings. ]. b. Press the Shutter/Select button [ c. Press the Power/Mode button [ ] to cycle to Wi-Fi RC, and ] to select it. then press the Shutter/Select button [ d.
/ Capturing Video and Photos Use the remote to capture video and photos with one camera or multiple cameras. To Start/Stop Recording: Press the Shutter/Select [ ] button. PRO TIP: When you connect your remote to your HERO4, you can add HiLight Tags to your video. HiLight Tags mark specific moments to make it easier to quickly find highlights during playback, sharing and editing. ] button on the remote to While recording, press the Settings/Tag [ add a HiLight Tag.
The following features are not available when using the remote with HERO4: • QuikCapture • Continuous photo with multiple cameras • Manually capturing photos while recording video with multiple cameras The following features are not available when using the remote with HERO3+ or HERO3: • One Button mode • Continuous photo • Manually capturing photos while recording video ] on the remote (to add a HiLight Tag or • The Settings/Tag button [ enter the Settings menu) 21
/ Changing Camera Settings You can use the Smart Remote to change your camera settings as long as your camera is not capturing video or photo. Note: To change camera settings, the remote must be connected to only one camera. To Change Camera Settings for HERO4: 1. Be sure your camera and remote are powered on and connected. ] to cycle to the 2. On the remote, press the Power/Mode button [ mode whose settings you want to change. ] to open the settings menu for 3. Press the Settings/Tag button [ that mode.
6. To go back or exit the settings menu, press the Settings/Tag ]. button [ To Change Camera Settings for HERO3+ and HERO3: 1. Be sure your camera and remote are powered on and connected. ] to cycle to Settings. 2. Press the Power/Mode button [ 3. Press the Shutter/Select button [ ] to select Settings. 4. Press the Power/Mode button [ ] to cycle through the settings. 5. Press the Shutter/Select button [ ] to select an option. ] to cycle 6.
/ Safety Information WARNING Failure to follow these safety instructions could result in fire, electric shock or other injury or damage to the Smart Remote or other property. HANDLING The Smart Remote contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint or insert foreign objects into the product. Do not use the Smart Remote if it has been damaged—for example, if the product is cracked, punctured or damaged by water.
KEEPING THE SMART REMOTE’S STATUS DISPLAY CLEAN Clean your Smart Remote status display immediately if it comes into contact with any contaminants that may cause stains, such as ink, dyes, makeup, dirt, food, oils and lotions. To clean the status display, use a soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don’t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia or abrasives to clean the status display.
USE WITH OTHER ELECTRONIC DEVICES Users of digital transceivers (avalanche beacons) should consult with their user manuals regarding use of GoPro cameras and other GPS or electronic devices when engaged in the avalanche beacon search mode in order to limit potential interference. TEMPERATURE Extreme temperatures may temporarily affect battery life or affect the functionality of the Smart Remote.
/ Regulatory Information To see the complete list of country certifications, refer to the Important Product + Safety Information Guide document included with your product.
Learn more about GoPro products at gopro.
