Operation Manual

EN 23
SETTINGS
4. Empty the tank of water, pour the contents of the descaler bottle
into the tank respecting the instructions given on the descaler pack,
then add water. For subsequent descaling operations, descaling
solu tion can be purchased from authorised technical service
centres.
Make sure that any splashes from the descaling product do
not come into contact with surfaces that are sensitive to acids,
such as marble, limestone and ceramic.
5. Put a container with a capacity of at least 2 litres underneath the hot
water nozzle.
6. Press the touch key ‘OK’ (9). The display shows “DESCALING”.The
descaling liquid runs out of the hot water nozzle.
The descaling program automatically goes through a serie of rinses
and pauses to remove limescale deposits from the inside of the
coffee machine. After about 30 minutes the water tank is empty
and the top line of the display alternates between “DESCALE
COMPLETE” and “PLEASE CONFIRM”.
7. Press the touch key ‘OK’ (9). The display shows “RINSING, FILL
TANK”. The appliance is now ready for a rinsing process with clean
water.
8. Empty the container under the hot water nozzle and put it back
under the hot water nozzle.
9. Take out the water tank and fi ll it with clean water.
10. Put the water tank back in place. The display shows: “PLEASE
CONFIRM”.
11. Press the touch key ‘OK’ (9). A rinsing process takes place with
clean water and the rinsing water runs out of the hot water nozzle.
After a few minutes the water tank is empty and the display shows
“PLEASE CONFIRM”.
12. Press the touch key ‘OK’ (9). The display shows “RINSING
COMPLETE CONFIRM”.
13. Press the touch key ‘OK’ (9). The display shows “DESCALE
COMPLETE” and then “FILL TANK!”
14. Take out the water tank, fi ll it with clean water and put it back in
place.
The appliance is now ready for use again and is back to the last
coffee mode selected.
5
2
7
9