Operation Manual

Instructions for use, installation and connection
107
Hotplates
Controlling the operation of a three ring hotplate
Three ring hotplate offers the possibility to adapt the heating
surface to the size and the shape of the cooking dish.
The hotplate is switched on/off by the relevant control knob.
• Central ring is switched on by turning the knob to the
position of the double ring symbol
. Then select the
desired heating power.
• The largest, third ring is switched on by turning the relevant
hotplate knob all the way (see symbol
; a click is heard).
Then select the desired heating power.
• All hotplate rings are switched off by turning the knob into
the "0" position (OFF).
Controlling double circle hotplate and roasting pan
hotplate
The surface size of both hotplates is designed to suit different
types and sizes of dishes. The hotplate is switched on and off
with the relevant knob on the control panel.
• Larger hotplate is activated by turning the button to the
extreme position (see the symbol
; a click is heard), and
then setting the desired power stage.
• All hotplates are switched off by turning the button to the
position "0" (OFF).
Hotplate with extended
rings button
Hotplate with extended ring
button
Three ring hotplate Two ring hotplate Roast pan hotplate
Hi-Light hotplates
These hotplates differ from the regular ones by their extremely
fast heating, so that the cooking process is accelerated.
Remaining heat indicators
Each hotplate is equipped with the signal lamp which is lit up
when the hotplate reaches certain temperature and becomes
hot. Once it is cooled down again, the signal lamp goes off.
The indicator will lit up also if a hot dish is placed upon any of
the hotplates.
Oven
Important warnings!
• Never put aluminum foil to the bottom of the oven, and do
not place any crockery upon it. The oven enamel may be
damaged by the excessive heat.
• Fruit juice, dripping from the baking pan, may produce stains
upon the enamel, which are very hard to remove.
Operation
Oven is controlled by the
function knob and the
temperature selection knob.
Temperature selection knob
Function knob
Modes of operation
Oven may be used in the following modes.
Oven illumination
Some models have installed two lamps for oven lighting; one at
the top of rear wall and the second one at the middle of right-
handed side wall.
Oven illumination may be switched on independently, without
any other function.
This may come handy during the cleaning, or when switched
off and using the remaining oven heat.
During all other oven functions the illumination is automatically
switched on with the selection of a particular function.
Some models have installed two lamps for oven lighting; one at
the top of rear wall and the second one at the middle of right-
handed side wall .
Applying upper and lower heater
Heaters from the upper and the lower side uniformly heat the
exposed food.
Baking and roasting is possible only at single level.