Instructions for Use GB IE MT
GLASS-CERAMIC BUILT-IN COOKING HOB Dear customer! Glass-ceramic hob is intended for use in households. Our products are packed in environment-friendly materials which can be recycled, disposed of, or destroyed without imposing any burden on the environment. Instructions for use are intended for the user. They describe the appliance and its operation. The instructions apply to various types of appliances and may therefore include description of functions that may not be available on your appliance.
TABLE IMPORTANT - READ BEFORE USING THE ................................................................5 APPLIANCE ........................................................................................................................5 Safety percautions........................................................................................................................5 Warnings..............................................................................................................................
IMPORTANT - READ BEFORE USING THE APPLIANCE Safety percautions • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or metal capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is intended solely for cooking. Do not use it for any other purpose, e.g. for room heating. Do not place empty cookware on the cooking zones. • If another electrical appliance is connected to a AC power socket near the appliance, make sure the power cord does not come into contact with hot cooking zones. • Do not store temperature-sensitive items underneath the appliance, such as cleaners or detergents, spray cans etc.
APPLIANCE DESCRIPTION 2 1. Cooking 2. Cooking 3. Cooking 4. Cooking 5.
COOKING ZONES Before using the appliance for the first time Clean the glass-ceramic surface with a damp cloth and some manual dishwashing detergent. Do not use aggressive detergents such as abrasive cleaners that can scratch the surface, abrasive dishwashing sponges, or stain removers.
Tips on using the cookware Use high-quality cookware with a flat and stable bottom. • Transmission of heat is best when the pan bottom and the cooking zone are of the same diameter, and the pan is placed on the middle of the cooking zone. • When using a tempered glass (Pyrex) or porcelain cookware, please follow the cookware manufacturer’s instructions. • When using a pressure cooker, do not leave it unattended until the desired pressure is reached.
OPERATING THE COOKING ZONES • Turn on the cooking zones using the knobs installed on the control panel. • The symbols next to the knobs indicate which cooking zone is controlled by a particular knob. • Cooking zone heating power can be set either continuously (1-9). • With energy switches, rotate the knob in the clockwise direction to increase the heating power, or rotate it in anti-clockwise direction to decrease the power.
When the double-ring cooking zone control switch is rotated normally, the basic cooking zone (internal) is activated. If you wish to activate the entire cooking zone, rotate the knob to the symbol that follows the number signs, to hear a ‘click’ sound; then, rotate it back to the desired position. The entire cooking zone is switched off by rotating the knob back to the “0” position. Control lights Whenever at least one cooking zone is switched on, a yellow light (LED) is lit up.
CLEANING AND MAINTENANCE Cleaning Figure 1 Figure 2 Figure 3 After each use of the glass-ceramic hob, wait for it to cool down and clean it; otherwise, even the smallest food residue will be burnt onto the hot surface next time you use the appliance. For regular cleaning and maintenance of the glass-ceramic surface, use special conditioning agents which form a protective layer on the surface, shielding it from dirt.
Sugar and sugar-laden food may permanently damage the glass-ceramic surface (Figure 5); therefore, they should be removed from the glass-ceramic surface as soon as possible, although the cooking zone may still be hot (Figure 4). Clean the glass ceramic hob with a mild non-abrasive cleaner and a soft sponge that will not scratch the surface. Figure 5 Any change in the color of the glass-ceramic surface does not affect its operation or the stability of the surface.
Installing the foam gasket Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket must be attached to the lower side of the glass ceramic (glass) cooking hob (see figure above). Do not install the appliance without the foam gasket! The gasket should be attached to the appliance in the following way: - Remove the protective film from the gasket.
be installed no less than 60 millimeters from the lower surface of the worktop. The space between the partition wall and the hob must be empty; no objects should be placed into that gap. • On the furniture back wall there should be a cutout with width of at least 175 mm along the entire width of the furniture element. • Only type EVP4..,EVP2.., ovens fitted with a cooling fan may be installed underneath this cooking hob.
CONNECTING THE APPLIANCE TO THE POWER MAINS Important warnings • The appliance may only be connected by an authorized skilled technician. • Electric system protection should comply with all relevant regulations. • The connection clips can be accessed when the connection clip covers are opened / removed. • Before connecting the appliance, make sure the voltage indicated on the rating plate is consistent with the voltage in your home circuit.
• The appliances are suitable for photovoltaic electrical power under the condition that electrical voltage will be 220VAC - 240VAC with semi tonic frequency 50 Hz in order the appliance to operate properly (alternative a generator can be used with the same technical characteristic).’’ • Incorrect connection may destroy parts of the appliance, making the warranty void. • Before connecting the appliance, make sure the voltage indicated on the rating plate is consistent with the voltage in your home network.
TECHNICAL CHARACTERISTICS Rating plate A B C D E F G Serial number Code Model Type Trademark Technical information Compliance indications / symbols WE RESERVE THE RIGHT TO MAKE ANY CHANGES THAT DO NOT AFFECT THE FUNCTIONALITY OF THE APPLIANCE. 425225 Instructions for use of the appliance can also be found on our website at www.gorenje.com / < http://www.gorenje.
www.gorenje.com Cooking with passion.
