Operating Instructions and Installation Instructions

425225

• Cooking hobs can be installed into worktops that are 30

to 50 mm thick.

• The kitchen furniture element underneath the hob

should not be ﬁ tted with a drawer. If the kitchen

furniture element as a horizontal partition wall, it should

Before inserting the appliance into the opening in the

kitchen worktop, the supplied foam gasket must be

attached to the lower side of the glass ceramic (glass)

cooking hob (see ﬁ gure above). Do not install the

appliance without the foam gasket!

The gasket should be attached to the appliance in the

following way:

- Remove the protective ﬁ lm from the gasket.

- Then, attach the gasket to the lower side of the glass,

approximately 2-3 millimetres from the edge (as shown

in the ﬁ gure). The gasket must be attached along the

entire length of the glass edge and should not overlap

at the corners.

- When installing the gasket, make sure that the glass

does not come into contact with any sharp objects.

NOTE!

On some appliances the gasket is already installed!

Installing the foam

gasket

Worktop cutout

dimensions