Operating Instructions and Installation Instructions

425225
be installed no less than 60 millimeters from the lower
surface of the worktop. The space between the partition
wall and the hob must be empty; no objects should be
placed into that gap.
• On the furniture back wall there should be a cutout with
width of at least 175 mm along the entire width of the
furniture element.
• Only type EVP4..,EVP2.., ovens fi tted with a cooling fan
may be installed underneath this cooking hob.
Installation procedure
• The worktop should be installed completely horizontally.
• The cuto surfaces should be appropriately protected.
• Attach the fastening elements (4x - SVK6…600 mm; 6x
- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied
screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x -
SVK8…850 mm) to the left and right wall of the cooking
hob and the worktop cuto .
• Connect the cooking hob to the power mains (see
instructions for connecting a cooking hob on a power
network).
• Insert the cooking hob into he cuto and press it heavily
from above against the worktop.
• For screwing down the fi xing clip it is not allowed to
use screws longer than 6,5 mm.
• Before installing an oven, the rear wall of the kitchen
furniture element should be removed in the area of the
cooking hob cutout.
15